��300000-3ffffc VERBOSE: fastboot 400000-bffffc VERBOSE: nvme c00000-dffffc VERBOSE: boot e00000-4dffffc VERBOSE: reserved 4e00000-14dffffc VERBOSE: cache 14e00000-24dffffc VERBOSE: system 24e00000-1d1ffbdfc INFO: Hisilicon HiKey platform is in�� NOTICE: BL1: Booting BL2 INFO: BL1: BL2 address = 0xf9818000 INFO: BL1: BL2 spsr = 0x3c5 VERBOSE: BL1: BL2 memory layout address = 0xf9821100 INFO: [BDID] [fff91c18] midr: 0x410fd033 INFO: [BDID] [fff91c1c] board type: 0 INFO: [BDID] [fff91c20] board id: 0x2b INFO: init_acpu_dvfs: pmic version 17 INFO: init_acpu_dvfs: ACPU_CHIP_MAX_FREQ=0x186a00. INFO: acpu_dvfs_volt_init: success! INFO: acpu_dvfs_set_freq: support freq num is 5 INFO: acpu_dvfs_set_freq: start prof is 0x4 INFO: acpu_dvfs_set_freq: magic is 0x5a5ac5c5 INFO: acpu_dvfs_set_freq: voltage: INFO: - 0: 0x49 INFO: - 1: 0x49 INFO: - 2: 0x50 INFO: - 3: 0x60 INFO: - 4: 0x78 NOTICE: acpu_dvfs_set_freq: set acpu freq succeCXV������j�2����5 VERBOSE: fastboot 400000-bffffc VERBOSE: nvme c00000-dffffc VERBOSE: boot e00000-4dffffc VERBOSE: reserved 4e00000-14dffffc VERBOSE: cache 14e00000-24dffffc VERBOSE: system 24e00000-1d1ffbdfc NOTICE: BL2: v1.1(debug):e9b4909 NOTICE: BL2: Built : 22:41:37, Apr 7 2016 INFO: BL2: LoadINFO: Skip reserving memory: 0x1000000 - 0x1023d00 INFO: File 'bl30.bin' loaded: 0x1000000 - 0x1023d00 INFO: bl2_plat_handle_bl30: [1000000] 3a334d43 35313032 2f34302f 32203930 INFO: bl2_plat_handle_bl30: [10000c8] 0 0 b 0 INFO: bl2_plat_handle_bl30: [1000190] 17 0 0 0 INFO: bl2_plat_handle_bl30: [1023cf0] 0 0 0 0 INFO: hisi_mcu_load_image: mcu sections 0: INFO: hisi_mcu_load_image: src = 0x1000200 INFO: hisi_mcu_load_image: dst = 0xf6000000 INFO: hisi_mcu_load_image: size = 31184 INFO: hisi_mcu_load_image: [SRC 0x1000200] 0x8000 0x3701 0x7695 0x7689 INFO: hisi_mcu_load_image: [DST 0xf6000000] 0x8000 0x3701 0x7695 0x7689 INFO: hisi_mcu_load_image: mcu sections 1: INFO: hisi_mcu_load_image: src = 0x1007bd0 INFO: hisi_mcu_load_image: dst = 0x5e00000 INFO: hisi_mcu_load_image: size = 93828 INFO: hisi_mcu_load_image: [SRC 0x1007bd0] 0xf000b510 0x2103fb3d 0xf0004604 0xf003fb57 INFO: hisi_mcu_load_image: [DST 0x5e00000] 0xf000b510 0x2103fb3d 0xf0004604 0xf003fb57 INFO: hisi_mcu_load_image: mcu sections 2: INFO: hisi_mcu_load_image: src = 0x101ea54 INFO: hisi_mcu_load_image: dst = 0x5e16e84 INFO: hisi_mcu_load_image: size = 15428 INFO: hisi_mcu_load_image: [SRC 0x101ea54] 0x9 0x1020640 0x10001 0x8f0d180 INFO: hisi_mcu_load_image: [DST 0x5e16e84] 0x9 0x1020640 0x10001 0x8f0d180 INFO: hisi_mcu_load_image: mcu sections 3: INFO: hisi_mcu_load_image: src = 0x1022698 INFO: hisi_mcu_load_image: dst = 0x5e22a10 INFO: hisi_mcu_load_image: size = 3060 INFO: hisi_mcu_load_image: [SRC 0x1022698] 0x0 0x0 0x0 0x0 INFO: hisi_mcu_load_image: [DST 0x5e22a10] 0x0 0x0 0x0 0x0 INFO: hisi_mcu_load_image: mcu sections 4: INFO: hisi_mcu_load_image: src = 0x102328c INFO: hisi_mcu_load_image: dst = 0x5e23604 INFO: hisi_mcu_load_image: size = 2616 INFO: hisi_mcu_load_image: [SRC 0x102328c] 0xf80000a0 0x0 0xf80000ac 0x0 INFO: hisi_mcu_load_image: [DST 0x5e23604] 0xf80000a0 0x0 0xf80000ac 0x0 INFO: hisi_mcu_start_run: AO_SC_SYS_CTRL2=0 INFO: bl2_plat_handle_bl30: mcu pc is 42933301 INFO: bl2_plat_handle_bl30: AO_SC_PERIPH_CLKSTAT4 is 39018f09 INFO: BL2: TrustZone: protecting 16777216 bytes of memory at 0x3f000000 INFO: BL2: LoaVERBOSE: Reserved 284080 bytes (discarded 0 bytes below) INFO: File 'bl32.bin' loaded: 0x3f000000 - 0x3f0455b0 INFO: BL2: Load`VERBOSE: Reserved 167772160 bytes (discarded 167430368 bytes above) INFO: File 'bl33.bin' loaded: 0x35000000 - 0x35053720 NOTICE: BL1: Booting BL3-1 INFO: BL1: BL3-1 address = 0xf9858000 INFO: BL1: BL3-1 spsr = 0x3cd INFO: BL1: BL3-1 params address = 0xf9821920 INFO: BL1: BL3-1 plat params address = 0x0 NOTICE: BL3-1: v1.1(debug):e9b4909 NOTICE: BL3-1: Built : 22:41:53, Apr 7 2016 VERBOSE: EDMAC_AXI_CONF(0): data:0x0 VERBOSE: EDMAC_AXI_CONF(0): data:0x40040 VERBOSE: EDMAC_AXI_CONF(1): data:0x0 VERBOSE: EDMAC_AXI_CONF(1): data:0x40040 VERBOSE: EDMAC_AXI_CONF(2): data:0x0 VERBOSE: EDMAC_AXI_CONF(2): data:0x40040 VERBOSE: EDMAC_AXI_CONF(3): data:0x0 VERBOSE: EDMAC_AXI_CONF(3): data:0x40040 VERBOSE: EDMAC_AXI_CONF(4): data:0x0 VERBOSE: EDMAC_AXI_CONF(4): data:0x40040 VERBOSE: EDMAC_AXI_CONF(5): data:0x0 VERBOSE: EDMAC_AXI_CONF(5): data:0x40040 VERBOSE: EDMAC_AXI_CONF(6): data:0x0 VERBOSE: EDMAC_AXI_CONF(6): data:0x40040 VERBOSE: EDMAC_AXI_CONF(7): data:0x0 VERBOSE: EDMAC_AXI_CONF(7): data:0x40040 VERBOSE: EDMAC_AXI_CONF(8): data:0x0 VERBOSE: EDMAC_AXI_CONF(8): data:0x40040 VERBOSE: EDMAC_AXI_CONF(9): data:0x0 VERBOSE: EDMAC_AXI_CONF(9): data:0x40040 VERBOSE: EDMAC_AXI_CONF(10): data:0x0 VERBOSE: EDMAC_AXI_CONF(10): data:0x40040 VERBOSE: EDMAC_AXI_CONF(11): data:0x0 VERBOSE: EDMAC_AXI_CONF(11): data:0x40040 VERBOSE: EDMAC_AXI_CONF(12): data:0x0 VERBOSE: EDMAC_AXI_CONF(12): data:0x40040 VERBOSE: EDMAC_AXI_CONF(13): data:0x0 VERBOSE: EDMAC_AXI_CONF(13): data:0x40040 VERBOSE: EDMAC_AXI_CONF(14): data:0x0 VERBOSE: EDMAC_AXI_CONF(14): data:0x40040 VERBOSE: EDMAC_AXI_CONF(15): data:0x0 VERBOSE: EDMAC_AXI_CONF(15): data:0x40040 INFO: BL3-1: Initializing runtime services INFO: BL3-1: Initializing BL3-2 INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address = 0x35000000 INFO: BL3-1: Next image spsr = 0x3c9 U-Boot 2016.03-00670-g46a16bd-dirty (Apr 07 2016 - 22:28:28 +0800)hikey DRAM: 1008 MiB HI6553 PMIC init MMC: config_sd_carddetect: SD card not present HiKey DWMMC: 0, HiKey DWMMC: 1 Card did not respond to voltage select! ** Bad device mmc 1 ** Using default environment In: serial_pl01x Out: serial_pl01x Err: serial_pl01x Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 => usb start starting USB... USB0: Core Release: 3.00a scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found => setenv ipaddr 192.168.1.201 => setenv serverip 192.168.1.94 => setenv bootargs console=ttyAMA3,115200 earlycon=pl011,0xf7113000 root=/dev/mmcblk0p9 rootwait rw => tftpboot 0x10000000 Image.leo Using asx0 device TFTP from server 192.168.1.94; our IP address is 192.168.1.201 Filename 'Image.leo'. Load address: 0x10000000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################### 1.9 MiB/s done Bytes transferred = 10778624 (a47800 hex) => tftpboot 0x13000000 hi6220-hikey.dtb.leo Using asx0 device TFTP from server 192.168.1.94; our IP address is 192.168.1.201 Filename 'hi6220-hikey.dtb.leo'. Load address: 0x13000000 Loading: #### 1.7 MiB/s done Bytes transferred = 46584 (b5f8 hex) => booti 0x10000000 - 0x13000000 ## Flattened Device Tree blob at 13000000 Booting using the fdt blob at 0x13000000 reserving fdt memory region: addr=0 size=7400000 Using Device Tree in place at 0000000013000000, end 000000001300e5f7 arch_fixup_fdt: start 3e73d9f0, size 3e73d9f8 Starting kernel ... Booting Linux on physical CPU 0x0 Initializing cgroup subsys cpu Linux version 4.4.0+ (leoy@leoy-linaro) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #14 SMP PREEMPT Fri Apr 8 11:39:51 CST 2016 Boot CPU: AArch64 Processor [410fd033] earlycon: Early serial console at MMIO 0xf7113000 (options '') bootconsole [uart0] enabled efi: Getting EFI parameters from FDT: efi: UEFI not found. cma: Reserved 128 MiB at 0x0000000036c00000 Kernel panic - not syncing: ERROR: Failed to allocate 0x1000 bytes below 0x0. CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.0+ #14 Hardware name: HiKey Development Board (DT) Call trace: [] dump_backtrace+0x0/0x114 [] show_stack+0x14/0x1c [] dump_stack+0x90/0xd0 [] panic+0xe4/0x22c [] memblock_alloc_base+0x30/0x3c [] memblock_alloc+0x10/0x18 [] early_alloc+0x18/0x54 [] __create_mapping.isra.10+0x1d4/0x450 [] paging_init+0x10c/0x1c0 [] setup_arch+0x110/0x540 [] start_kernel+0xa8/0x39c [<00000000006d9000>] 0x6d9000 ---[ end Kernel panic - not syncing: ERROR: Failed to allocate 0x1000 bytes below 0x0.