On 4 October 2015 at 00:07, Fathi Boudra <fathi.boudra@linaro.org> wrote:

On 3 October 2015 at 16:06, Lee Jones <lee.jones@linaro.org> wrote:
> After following the instructions in the Quick Start Guide for booting
> from SD card I receive:
>
> [tux.img][tux.img][tux.img][tux.img][tux.img][tux.img][tux.img][tux.img]
> [STAMP] kvm [1]: HYP mode not available
> [STAMP] of_dma_request_slave_channel: dma-names property of node
> '/smb/uart@f8015000' missing or empty
> [STAMP] hisi_thermal f7030700.tsensor: THERMAL ALARM: T > 80
> <DEAD>
>
> Has anyone else seen this? Is it a known issue, or all-my-fault(tm)?

there's a known issue in the latest builds however build #323 should work.
https://bugs.96boards.org/show_bug.cgi?id=100

Hi, Lee, Fathi

I updated this bug, it's not reproduced with the following images:

UEFI #72,
boot img: Debian 354, https://builds.96boards.org/snapshots/hikey/linaro/debian/354/boot-fat.uefi.img.gz

Debian developer image for SD card: hikey-jessie_developer_20150929-354.img, 

booting from SD card can succeed.

> NB: This is 'hikey-jessie_alip_20150701-323.img'. Booting
> 'hikey-jessie_developer_20150701-323.emmc.img' from eMMC works fine.

Debian #323 looks quite old to me. I will not recommend you to waste time on it.

BTW, one side-note to

Fathi,

With Debian #354, boot image is always in eMMC. Can we choose to load grub from SD card then load Image from SD's boot partition?

Ref: when booting from SD card:

root@linaro-developer:~# mount

/dev/mmcblk1p2 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/mmcblk0p6 on /boot type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
...

-Guodong

>
> Kind regards,
> Lee

Cheers,
Fathi

_______________________________________________
Dev mailing list
Dev@lists.96boards.org
https://lists.96boards.org/mailman/listinfo/dev