[    3.438725] calling  nf_defrag_init+0x0/0x60 @ 1
[    3.438751] initcall nf_defrag_init+0x0/0x60 returned 0 after 18 usecs
[    3.438761] calling  reject_tg6_init+0x0/0x1c @ 1
[    3.438769] initcall reject_tg6_init+0x0/0x1c returned 0 after 0 usecs
[    3.438777] calling  packet_init+0x0/0x58 @ 1
[    3.438784] NET: Registered protocol family 17
[    3.438799] initcall packet_init+0x0/0x58 returned 0 after 13 usecs
[    3.438808] calling  ipsec_pfkey_init+0x0/0x98 @ 1
[    3.438821] NET: Registered protocol family 15
[    3.438829] initcall ipsec_pfkey_init+0x0/0x98 returned 0 after 13 usecs
[    3.438839] calling  init_rpcsec_gss+0x0/0x88 @ 1
[    3.438887] initcall init_rpcsec_gss+0x0/0x88 returned 0 after 39 usecs
[    3.438898] calling  init_p9+0x0/0x28 @ 1
[    3.438921] 9pnet: Installing 9P2000 support
[    3.438930] initcall init_p9+0x0/0x28 returned 0 after 25 usecs
[    3.438940] calling  p9_virtio_init+0x0/0x40 @ 1
[    3.438987] initcall p9_virtio_init+0x0/0x40 returned 0 after 37 usecs
[    3.438998] calling  init_dns_resolver+0x0/0x108 @ 1
[    3.439025] Key type dns_resolver registered
[    3.439034] initcall init_dns_resolver+0x0/0x108 returned 0 after 27 usecs
[    3.439393] calling  fpsimd_init+0x0/0x6c @ 1
[    3.439401] initcall fpsimd_init+0x0/0x6c returned 0 after 2 usecs
[    3.439412] calling  sys_reg_genericv8_init+0x0/0x60 @ 1
[    3.439420] initcall sys_reg_genericv8_init+0x0/0x60 returned 0 after 0 usecs
[    3.439432] calling  init_oops_id+0x0/0x44 @ 1
[    3.439439] initcall init_oops_id+0x0/0x44 returned 0 after 0 usecs
[    3.439451] calling  pm_qos_power_init+0x0/0x88 @ 1
[    3.439750] initcall pm_qos_power_init+0x0/0x88 returned 0 after 283 usecs
[    3.439761] calling  pm_debugfs_init+0x0/0x34 @ 1
[    3.439784] initcall pm_debugfs_init+0x0/0x34 returned 0 after 13 usecs
[    3.439795] calling  wakeup_reason_init+0x0/0xd0 @ 1
[    3.439817] initcall wakeup_reason_init+0x0/0xd0 returned 0 after 13 usecs
[    3.439828] calling  printk_late_init+0x0/0x60 @ 1
[    3.439843] initcall printk_late_init+0x0/0x60 returned 0 after 7 usecs
[    3.439856] calling  tk_debug_sleep_time_init+0x0/0x4c @ 1
[    3.439872] initcall tk_debug_sleep_time_init+0x0/0x4c returned 0 after 8 usecs
[    3.439882] calling  taskstats_init+0x0/0x70 @ 1
[    3.439913] registered taskstats version 1
[    3.439920] initcall taskstats_init+0x0/0x70 returned 0 after 30 usecs
[    3.439928] calling  clear_boot_tracer+0x0/0x3c @ 1
[    3.439935] initcall clear_boot_tracer+0x0/0x3c returned 0 after 0 usecs
[    3.439946] calling  add_shrinker_debug+0x0/0x38 @ 1
[    3.439960] initcall add_shrinker_debug+0x0/0x38 returned 0 after 7 usecs
[    3.439973] calling  fault_around_debugfs+0x0/0x44 @ 1
[    3.439987] initcall fault_around_debugfs+0x0/0x44 returned 0 after 6 usecs
[    3.439999] calling  max_swapfiles_check+0x0/0x8 @ 1
[    3.440007] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
[    3.440021] calling  set_recommended_min_free_kbytes+0x0/0x28 @ 1
[    3.440035] initcall set_recommended_min_free_kbytes+0x0/0x28 returned 0 after 6 usecs
[    3.440047] calling  check_early_ioremap_leak+0x0/0x6c @ 1
[    3.440056] initcall check_early_ioremap_leak+0x0/0x6c returned 0 after 0 usecs
[    3.440065] calling  init_btrfs_fs+0x0/0x110 @ 1
[    3.440644] Btrfs loaded
[    3.440672] initcall init_btrfs_fs+0x0/0x110 returned 0 after 584 usecs
[    3.440683] calling  init_root_keyring+0x0/0x14 @ 1
[    3.440724] initcall init_root_keyring+0x0/0x14 returned 0 after 33 usecs
[    3.440735] calling  prandom_reseed+0x0/0x58 @ 1
[    3.440782] initcall prandom_reseed+0x0/0x58 returned 0 after 38 usecs
[    3.440795] calling  pci_resource_alignment_sysfs_init+0x0/0x28 @ 1
[    3.440810] initcall pci_resource_alignment_sysfs_init+0x0/0x28 returned 0 after 6 usecs
[    3.440820] calling  pci_sysfs_init+0x0/0x64 @ 1
[    3.440830] initcall pci_sysfs_init+0x0/0x64 returned 0 after 3 usecs
[    3.440846] calling  deferred_probe_initcall+0x0/0x88 @ 1
[    3.441780] uart-pl011 f7111000.uart: ttyAMA1 at MMIO 0xf7111000 (irq = 69, base_baud = 0) is a PL011 rev2
[    3.442580] uart-pl011 f7112000.uart: ttyAMA2 at MMIO 0xf7112000 (irq = 70, base_baud = 0) is a PL011 rev2
[    3.442923] fixed_5v_hub: 5000 mV 
[    3.514367] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[    3.514407] wlan-en-regulator: 1800 mV 
[    3.514600] mmc1: new SDHC card at address aaaa
[    3.515880] mmcblk1: mmc1:aaaa SS16G 14.8 GiB 
[    3.518521]  mmcblk1: p1
[    3.536626] [drm] HDMI: new_status=1,old_status=2,hpd=1,dpms=3
[    3.544371] Raw EDID:
[    3.546680]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.552450]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.558220]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.563972]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.569730]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.575489]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.581240]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.586997]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    3.592759] hisi-drm smb:display-subsystem: DSI-1: EDID block 0 invalid.
[    3.592866] [drm] HDMI: mode=0,format_422=0,format_ycbcr=0
[    3.594160] [drm] May has one empty edid block!
[    3.614451] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[    3.614453] [drm] mipi_init , exit success!
[    3.633950] Console: switching to colour frame buffer device 160x45
[    3.644354] hisi-drm smb:display-subsystem: fb0:  frame buffer device
[    3.644360] hisi-drm smb:display-subsystem: registered panic notifier
[    3.699236] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
[    3.700240] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
[    3.700300] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
[    3.700416] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 106, 32 bit host data width, 64 deep fifo
[    3.701082] dwmmc_k3 f723f000.dwmmc2: No vqmmc regulator found
[    3.714209] mmc_host mmc2: Bus speed (slot 0) = 25000000Hz (slot req 400000Hz, actual 390625HZ div = 32)
[    3.724403] usb 1-1: new full-speed USB device number 2 using dwc2
[    3.734580] dwmmc_k3 f723f000.dwmmc2: 1 slots initialized
[    3.734751] initcall deferred_probe_initcall+0x0/0x88 returned 0 after 286958 usecs
[    3.734831] calling  otg_wakelock_init+0x0/0x11c @ 1
[    3.734907] initcall otg_wakelock_init+0x0/0x11c returned 0 after 33 usecs
[    3.734968] calling  rtc_hctosys+0x0/0x118 @ 1
[    3.735007] /media/scottb/linaro/hikey/source/linux/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    3.740886] dwmmc_k3 f723f000.dwmmc2: card claims to support voltages below defined range
[    3.744996] initcall rtc_hctosys+0x0/0x118 returned -19 after 9771 usecs
[    3.745008] calling  hisi_thermal_init+0x0/0x20 @ 1
[    3.750610] mmc_host mmc2: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[    3.751600] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[    3.752501] mmc2: new SDIO card at address 0001
[    3.791115] hisi_thermal f7030700.tsensor: THERMAL ALARM: T > 80
[    3.871327] initcall hisi_thermal_init+0x0/0x20 returned 0 after 123344 usecs
[    3.871342] calling  efi_shutdown_init+0x0/0x44 @ 1
[    3.871350] initcall efi_shutdown_init+0x0/0x44 returned -19 after 0 usecs
[    3.871363] calling  clk_debug_init+0x0/0x150 @ 1
[    3.877401] initcall clk_debug_init+0x0/0x150 returned 0 after 5875 usecs
[    3.877424] calling  tcp_congestion_default+0x0/0x1c @ 1
[    3.877433] initcall tcp_congestion_default+0x0/0x1c returned 0 after 2 usecs
[    3.877445] calling  ip_auto_config+0x0/0xf08 @ 1
[    3.877486] initcall ip_auto_config+0x0/0xf08 returned 0 after 32 usecs
[    3.877500] calling  regulator_init_complete+0x0/0x1b0 @ 1
[    3.877531] SOC_MED: disabling
[    3.877549] G3D_PD_VDD: disabling
[    3.877567] initcall regulator_init_complete+0x0/0x1b0 returned 0 after 56 usecs
[    3.877584] calling  clk_disable_unused+0x0/0x130 @ 1
[    3.877674] initcall clk_disable_unused+0x0/0x130 returned 0 after 79 usecs
[    3.877683] calling  alsa_sound_last_init+0x0/0x80 @ 1
[    3.877688] ALSA device list:
[    3.877692]   No soundcards found.
[    3.877698] initcall alsa_sound_last_init+0x0/0x80 returned 0 after 8 usecs
[    3.878023] Freeing unused kernel memory: 376K (ffffffc000b2e000 - ffffffc000b8c000)
[    3.930776] systemd-udevd[926]: starting version 215
[    3.931934] random: systemd-udevd urandom read with 11 bits of entropy available
[    3.934534] usb 1-1: not running at top speed; connect to a high speed hub
[    3.935525] hub 1-1:1.0: USB hub found
[    3.935644] hub 1-1:1.0: 3 ports detected
[    4.215033] usb 1-1.2: new full-speed USB device number 3 using dwc2
[    4.316165] usb 1-1.2: not running at top speed; connect to a high speed hub
[    4.322816] hub 1-1.2:1.0: USB hub found
[    4.324244] hub 1-1.2:1.0: 4 ports detected
[    4.605225] usb 1-1.2.4: new full-speed USB device number 4 using dwc2
[    4.707903] usb 1-1.2.4: not running at top speed; connect to a high speed hub
[    5.570339] asix 1-1.2.4:1.0 eth0: register 'asix' at usb-f72c0000.usb-1.2.4, ASIX AX88772 USB 2.0 Ethernet, 00:0e:c6:f7:26:d0
[    9.474148] random: nonblocking pool is initialized
[   11.301227] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[   16.148550] systemd-udevd[1037]: starting version 215
[   17.887325] calling  wl1271_init+0x0/0x20 [wlcore_sdio] @ 1066
[   17.890809] initcall wl1271_init+0x0/0x20 [wlcore_sdio] returned 0 after 3310 usecs
[   17.981297] calling  kim_platform_driver_init+0x0/0x28 [st_drv] @ 1059
[   17.982105] (stk) :sysfs entries created
[   17.982731] initcall kim_platform_driver_init+0x0/0x28 [st_drv] returned 0 after 1313 usecs
[   19.023576] calling  rfkill_init+0x0/0x90 [rfkill] @ 1051
[   19.024589] initcall rfkill_init+0x0/0x90 [rfkill] returned 0 after 895 usecs
[   22.239551] calling  init_module+0x0/0x58 [mali] @ 1049
[   22.241292] Mali: GPU version: CF070000
[   22.245210] Mali: Mali device driver loaded
[   22.245259] initcall init_module+0x0/0x58 [mali] returned 0 after 5516 usecs
[   24.888481] calling  cfg80211_init+0x0/0xf8 [cfg80211] @ 1051
[   24.888775] ------------[ cut here ]------------
[   24.888820] WARNING: CPU: 5 PID: 1051 at /media/scottb/linaro/hikey/source/linux/net/wireless/reg.c:511 regulatory_init+0x88/0x128 [cfg80211]()
[   24.888825] db.txt is empty, you should update it...
[   24.888830] Modules linked in:
[   24.888836]  cfg80211(+) mali rfkill st_drv wlcore_sdio
[   24.888855] CPU: 5 PID: 1051 Comm: systemd-udevd Tainted: G        W      3.18.0linaro-hikey+ #3
[   24.888860] Call trace:
[   24.891390] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   24.891398] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   24.891409] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   24.891418] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   24.891424] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   24.891465] [<ffffffbffc0c717c>] regulatory_init+0x84/0x128 [cfg80211]
[   24.891506] [<ffffffbffc0c7070>] cfg80211_init+0x70/0xf8 [cfg80211]
[   24.891515] [<ffffffc000081548>] do_one_initcall+0x114/0x1a0
[   24.891524] [<ffffffc00011a9f0>] load_module+0x1664/0x1db0
[   24.891530] [<ffffffc00011b2a4>] SyS_finit_module+0x78/0x88
[   24.891535] ---[ end trace 1c3368bd4564d7e9 ]---
[   24.891580] cfg80211: Calling CRDA to update world regulatory domain
[   24.891755] initcall cfg80211_init+0x0/0xf8 [cfg80211] returned 0 after 3146 usecs
[   26.915280] cfg80211: World regulatory domain updated:
[   26.915317] cfg80211:  DFS Master region: unset
[   26.915331] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   26.915355] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   26.915373] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   26.915390] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   26.915411] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   26.915433] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   26.915452] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   26.915470] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   26.915489] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   33.376803] calling  ieee80211_init+0x0/0x4c [mac80211] @ 1051
[   33.376879] initcall ieee80211_init+0x0/0x4c [mac80211] returned 0 after 18 usecs
[   36.454000] calling  wl18xx_driver_init+0x0/0x28 [wl18xx] @ 1051
[   36.455292] initcall wl18xx_driver_init+0x0/0x28 [wl18xx] returned 0 after 1203 usecs
[   36.705449] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[   36.713246] wlcore: loaded
[   37.133688] systemd-journald[1002]: Received request to flush runtime journal from PID 1
[   38.046475] asix 1-1.2.4:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[   38.210473] asix 1-1.2.4:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[   42.545150] calling  bt_init+0x0/0xb8 [bluetooth] @ 1376
[   42.545165] Bluetooth: Core ver 2.19
[   42.545229] NET: Registered protocol family 31
[   42.545234] Bluetooth: HCI device and connection manager initialized
[   42.545281] Bluetooth: HCI socket layer initialized
[   42.545293] Bluetooth: L2CAP socket layer initialized
[   42.545338] Bluetooth: SCO socket layer initialized
[   42.545370] initcall bt_init+0x0/0xb8 [bluetooth] returned 0 after 179 usecs
[   42.737823] calling  btwilink_driver_init+0x0/0x28 [btwilink] @ 1376
[   42.738553] hdev ffffffc034650000
[   42.740262] HCI device registered (hdev ffffffc034650000)
[   42.740642] hci0 ffffffc034650000
[   42.740683] (stc):  chnl_id list empty :4 
[   42.740708] (stk) : st_kim_start
[   42.740790] initcall btwilink_driver_init+0x0/0x28 [btwilink] returned 0 after 2817 usecs
[   42.845738] (stk) :ldisc_install = 1
[   42.896498] (stc): st_tty_open 
[   42.896536] (stk) :line discipline installed
[   42.896946] (stk) :ti-connectivity/TIInit_11.8.32.bts
[   43.066027] (stk) :change remote baud rate command in firmware
[   43.066047] (stk) :skipping the wait event of change remote baud
[   43.761419] (stc): add_channel_to_table: id 4
[   43.761467] (stc): add_channel_to_table: id 2
[   43.761496] (stc): add_channel_to_table: id 3
[   43.762060] hci0: type 1 len 4
[   43.762594] hci0: type 1 len 4
[   43.762987] hci0: type 1 len 4
[   43.763390] hci0: type 1 len 4
[   43.764036] hci0: type 1 len 4
[   43.764458] hci0: type 1 len 4
[   43.764847] hci0: type 1 len 4
[   43.766505] hci0: type 1 len 4
[   43.766875] hci0: type 1 len 4
[   43.767242] hci0: type 1 len 4
[   43.767660] hci0: type 1 len 5
[   43.768025] hci0: type 1 len 6
[   43.768400] hci0: type 1 len 4
[   43.768780] hci0: type 1 len 4
[   43.769170] hci0: type 1 len 4
[   43.769571] hci0: type 1 len 4
[   43.770000] hci0: type 1 len 4
[   43.770405] hci0: type 1 len 4
[   43.770778] hci0: type 1 len 4
[   43.771148] hci0: type 1 len 4
[   43.771834] hci0: type 1 len 245
[   43.773112] hci0: type 1 len 5
[   43.773508] hci0: type 1 len 4
[   43.773879] hci0: type 1 len 5
[   43.774640] hci0: type 1 len 12
[   43.774870] hci0: type 1 len 11
[   43.775144] hci0: type 1 len 6
[   43.775345] hci0: type 1 len 12
[   43.775602] hci0: type 1 len 4
[   43.775833] hci0: type 1 len 4
[   45.593779] hci0: type 1 len 7
[   45.604007] hci0: type 1 len 252
[   45.605271] hci0: type 1 len 5
[   45.605599] hci0: type 1 len 245
[   45.608642] hci0: type 1 len 6
[   45.608915] hci0: type 1 len 36
[   45.609261] hci0: type 1 len 36
[   48.040555] ------------[ cut here ]------------
[   48.040599] WARNING: CPU: 6 PID: 1484 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   48.040617] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   48.040625] Modules linked in:
[   48.040634]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   48.040675] CPU: 6 PID: 1484 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   48.040684] Call trace:
[   48.043241] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   48.043255] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   48.043269] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   48.043282] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   48.043291] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   48.043304] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   48.043315] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   48.043330] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   48.043340] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   48.043349] ---[ end trace 1c3368bd4564d7ea ]---
[   49.484270] [drm] phystopstateclklane is not ready.
[   49.484319] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   49.484320] [drm] mipi_init , exit success!
[   50.477602] ------------[ cut here ]------------
[   50.477634] WARNING: CPU: 3 PID: 1484 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   50.477647] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   50.477654] Modules linked in:
[   50.477660]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   50.477689] CPU: 3 PID: 1484 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   50.477695] Call trace:
[   50.480151] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   50.480160] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   50.480170] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   50.480179] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   50.480185] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   50.480192] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   50.480199] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   50.480209] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   50.480215] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   50.480221] ---[ end trace 1c3368bd4564d7eb ]---
[   51.117660] ------------[ cut here ]------------
[   51.117690] WARNING: CPU: 7 PID: 1538 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   51.117704] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   51.117710] Modules linked in:
[   51.117715]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   51.117745] CPU: 7 PID: 1538 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   51.117751] Call trace:
[   51.120277] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   51.120286] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   51.120296] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   51.120305] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   51.120311] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   51.120318] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   51.120325] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   51.120335] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   51.120342] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   51.120348] ---[ end trace 1c3368bd4564d7ec ]---
[   51.154537] [drm] phystopstateclklane is not ready.
[   51.154580] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   51.154580] [drm] mipi_init , exit success!
[   51.275637] ------------[ cut here ]------------
[   51.275670] WARNING: CPU: 3 PID: 1538 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   51.275682] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   51.275687] Modules linked in:
[   51.275693]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   51.275722] CPU: 3 PID: 1538 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   51.275728] Call trace:
[   51.278185] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   51.278194] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   51.278204] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   51.278212] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   51.278218] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   51.278225] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   51.278231] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   51.278241] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   51.278248] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   51.278254] ---[ end trace 1c3368bd4564d7ed ]---
[   51.910721] ------------[ cut here ]------------
[   51.910754] WARNING: CPU: 6 PID: 1591 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   51.910767] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   51.910773] Modules linked in:
[   51.910779]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   51.910807] CPU: 6 PID: 1591 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   51.910813] Call trace:
[   51.913336] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   51.913345] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   51.913355] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   51.913364] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   51.913370] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   51.913376] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   51.913383] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   51.913393] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   51.913400] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   51.913405] ---[ end trace 1c3368bd4564d7ee ]---
[   51.944934] [drm] phystopstateclklane is not ready.
[   51.944980] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   51.944980] [drm] mipi_init , exit success!
[   52.068045] ------------[ cut here ]------------
[   52.068082] WARNING: CPU: 4 PID: 1591 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   52.068097] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   52.068105] Modules linked in:
[   52.068111]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   52.068147] CPU: 4 PID: 1591 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   52.068154] Call trace:
[   52.070612] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   52.070621] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   52.070634] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   52.070644] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   52.070651] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   52.070660] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   52.070667] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   52.070679] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   52.070688] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   52.070694] ---[ end trace 1c3368bd4564d7ef ]---
[   52.305284] ------------[ cut here ]------------
[   52.305315] WARNING: CPU: 3 PID: 1608 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   52.305328] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   52.305334] Modules linked in:
[   52.305340]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   52.305368] CPU: 3 PID: 1608 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   52.305374] Call trace:
[   52.309028] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   52.309037] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   52.309047] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   52.309055] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   52.309061] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   52.309070] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   52.309076] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   52.309085] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   52.309093] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   52.309099] ---[ end trace 1c3368bd4564d7f0 ]---
[   52.334560] [drm] phystopstateclklane is not ready.
[   52.334614] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   52.334614] [drm] mipi_init , exit success!
[   52.456962] ------------[ cut here ]------------
[   52.456996] WARNING: CPU: 1 PID: 1608 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   52.457009] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   52.457015] Modules linked in:
[   52.457020]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   52.457049] CPU: 1 PID: 1608 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   52.457054] Call trace:
[   52.459510] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   52.459518] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   52.459529] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   52.459537] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   52.459543] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   52.459550] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   52.459557] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   52.459566] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   52.459573] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   52.459579] ---[ end trace 1c3368bd4564d7f1 ]---
[   52.921430] ------------[ cut here ]------------
[   52.921463] WARNING: CPU: 2 PID: 1643 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   52.921475] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   52.921481] Modules linked in:
[   52.921487]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   52.921515] CPU: 2 PID: 1643 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   52.921521] Call trace:
[   52.924045] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   52.924054] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   52.924064] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   52.924072] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   52.924078] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   52.924086] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   52.924093] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   52.924104] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   52.924110] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   52.924115] ---[ end trace 1c3368bd4564d7f2 ]---
[   52.964587] [drm] phystopstateclklane is not ready.
[   52.964639] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   52.964640] [drm] mipi_init , exit success!
[   53.085604] ------------[ cut here ]------------
[   53.085635] WARNING: CPU: 2 PID: 1643 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   53.085648] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   53.085653] Modules linked in:
[   53.085660]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   53.085689] CPU: 2 PID: 1643 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   53.085694] Call trace:
[   53.088151] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   53.088160] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   53.088170] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   53.088178] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   53.088184] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   53.088190] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   53.088197] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   53.088207] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   53.088214] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   53.088219] ---[ end trace 1c3368bd4564d7f3 ]---
[   53.358132] ------------[ cut here ]------------
[   53.358164] WARNING: CPU: 6 PID: 1661 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   53.358176] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   53.358182] Modules linked in:
[   53.358188]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   53.358215] CPU: 6 PID: 1661 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   53.358221] Call trace:
[   53.362170] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   53.362179] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   53.362189] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   53.362197] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   53.362204] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   53.362210] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   53.362217] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   53.362227] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   53.362235] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   53.362240] ---[ end trace 1c3368bd4564d7f4 ]---
[   53.394553] [drm] phystopstateclklane is not ready.
[   53.394597] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   53.394598] [drm] mipi_init , exit success!
[   53.515886] ------------[ cut here ]------------
[   53.515919] WARNING: CPU: 7 PID: 1661 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   53.515932] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   53.515938] Modules linked in:
[   53.515944]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   53.515972] CPU: 7 PID: 1661 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   53.515978] Call trace:
[   53.518435] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   53.518444] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   53.518454] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   53.518462] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   53.518468] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   53.518475] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   53.518482] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   53.518491] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   53.518499] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   53.518504] ---[ end trace 1c3368bd4564d7f5 ]---
[   54.172568] ------------[ cut here ]------------
[   54.172598] WARNING: CPU: 1 PID: 1699 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   54.172610] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   54.172615] Modules linked in:
[   54.172622]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   54.172650] CPU: 1 PID: 1699 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   54.172655] Call trace:
[   54.175233] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   54.175253] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   54.175264] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   54.175272] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   54.175278] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   54.175287] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   54.175294] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   54.175303] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   54.175310] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   54.175316] ---[ end trace 1c3368bd4564d7f6 ]---
[   54.204572] [drm] phystopstateclklane is not ready.
[   54.204648] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   54.204648] [drm] mipi_init , exit success!
[   54.338596] ------------[ cut here ]------------
[   54.338630] WARNING: CPU: 6 PID: 1699 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   54.338645] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   54.338651] Modules linked in:
[   54.338659]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   54.338694] CPU: 6 PID: 1699 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   54.338700] Call trace:
[   54.341159] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   54.341169] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   54.341181] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   54.341190] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   54.341198] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   54.341207] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   54.341215] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   54.341226] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   54.341235] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   54.341241] ---[ end trace 1c3368bd4564d7f7 ]---
[   54.601691] ------------[ cut here ]------------
[   54.601727] WARNING: CPU: 7 PID: 1734 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   54.601740] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   54.601746] Modules linked in:
[   54.601753]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   54.601784] CPU: 7 PID: 1734 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   54.601790] Call trace:
[   54.604323] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   54.604336] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   54.604347] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   54.604355] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   54.604361] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   54.604370] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   54.604376] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   54.604386] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   54.604394] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   54.604501] ---[ end trace 1c3368bd4564d7f8 ]---
[   54.634696] [drm] phystopstateclklane is not ready.
[   54.634745] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   54.634746] [drm] mipi_init , exit success!
[   54.756653] ------------[ cut here ]------------
[   54.756686] WARNING: CPU: 5 PID: 1734 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   54.756701] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   54.756707] Modules linked in:
[   54.756715]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   54.756749] CPU: 5 PID: 1734 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   54.756755] Call trace:
[   54.759212] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   54.759222] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   54.759234] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   54.759244] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   54.759251] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   54.759260] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   54.759269] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   54.759280] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   54.759289] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   54.759295] ---[ end trace 1c3368bd4564d7f9 ]---
[   55.875551] ------------[ cut here ]------------
[   55.875582] WARNING: CPU: 4 PID: 1794 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   55.875595] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   55.875600] Modules linked in:
[   55.875607]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   55.875635] CPU: 4 PID: 1794 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   55.875641] Call trace:
[   55.878168] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   55.878176] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   55.878187] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   55.878195] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   55.878202] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   55.878209] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   55.878216] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   55.878226] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   55.878233] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   55.878239] ---[ end trace 1c3368bd4564d7fa ]---
[   55.904615] [drm] phystopstateclklane is not ready.
[   55.904712] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   55.904714] [drm] mipi_init , exit success!
[   56.041297] ------------[ cut here ]------------
[   56.041331] WARNING: CPU: 1 PID: 1794 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   56.041346] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   56.041353] Modules linked in:
[   56.041360]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   56.041395] CPU: 1 PID: 1794 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   56.041401] Call trace:
[   56.043860] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   56.043870] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   56.043882] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   56.043892] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   56.043900] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   56.043908] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   56.043917] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   56.043929] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   56.043937] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   56.043944] ---[ end trace 1c3368bd4564d7fb ]---
[   56.264963] ------------[ cut here ]------------
[   56.264993] WARNING: CPU: 6 PID: 1820 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   56.265006] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   56.265011] Modules linked in:
[   56.265017]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   56.265047] CPU: 6 PID: 1820 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   56.265053] Call trace:
[   56.267579] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   56.267587] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   56.267598] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   56.267606] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   56.267612] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   56.267620] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   56.267626] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   56.267636] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   56.267643] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   56.267649] ---[ end trace 1c3368bd4564d7fc ]---
[   56.294620] [drm] phystopstateclklane is not ready.
[   56.294721] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   56.294723] [drm] mipi_init , exit success!
[   56.428207] ------------[ cut here ]------------
[   56.428240] WARNING: CPU: 2 PID: 1820 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   56.428255] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   56.428260] Modules linked in:
[   56.428268]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   56.428302] CPU: 2 PID: 1820 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   56.428309] Call trace:
[   56.430768] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   56.430778] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   56.430790] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   56.430800] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   56.430807] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   56.430815] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   56.430824] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   56.430836] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   56.430845] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   56.430851] ---[ end trace 1c3368bd4564d7fd ]---
[   56.854110] ------------[ cut here ]------------
[   56.854145] WARNING: CPU: 7 PID: 1850 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   56.854160] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   56.854166] Modules linked in:
[   56.854173]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   56.854207] CPU: 7 PID: 1850 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   56.854215] Call trace:
[   56.856790] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   56.856805] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   56.856816] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   56.856825] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   56.856830] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   56.856839] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   56.856845] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   56.856855] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   56.856861] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   56.856867] ---[ end trace 1c3368bd4564d7fe ]---
[   56.884775] [drm] phystopstateclklane is not ready.
[   56.884870] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   56.884872] [drm] mipi_init , exit success!
[   57.017445] ------------[ cut here ]------------
[   57.017480] WARNING: CPU: 0 PID: 1850 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   57.017495] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   57.017502] Modules linked in:
[   57.017509]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   57.017544] CPU: 0 PID: 1850 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   57.017550] Call trace:
[   57.020016] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   57.020026] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   57.020039] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   57.020048] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   57.020055] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   57.020065] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   57.020073] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   57.020085] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   57.020094] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   57.020100] ---[ end trace 1c3368bd4564d7ff ]---
[   57.198766] ------------[ cut here ]------------
[   57.198797] WARNING: CPU: 7 PID: 1867 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   57.198810] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   57.198815] Modules linked in:
[   57.198821]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   57.198850] CPU: 7 PID: 1867 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   57.198855] Call trace:
[   57.201388] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   57.201398] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   57.201409] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   57.201418] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   57.201424] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   57.201432] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   57.201440] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   57.201450] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   57.201456] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   57.201463] ---[ end trace 1c3368bd4564d800 ]---
[   57.234770] [drm] phystopstateclklane is not ready.
[   57.234868] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   57.234870] [drm] mipi_init , exit success!
[   57.370386] ------------[ cut here ]------------
[   57.370430] WARNING: CPU: 0 PID: 1867 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   57.370448] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   57.370455] Modules linked in:
[   57.370465]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   57.370509] CPU: 0 PID: 1867 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   57.370517] Call trace:
[   57.372991] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   57.373005] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   57.373020] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   57.373033] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   57.373042] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   57.373054] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   57.373065] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   57.373080] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   57.373090] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   57.373100] ---[ end trace 1c3368bd4564d801 ]---
[   57.873742] ------------[ cut here ]------------
[   57.873777] WARNING: CPU: 1 PID: 1897 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   57.873792] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   57.873799] Modules linked in:
[   57.873806]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   57.873841] CPU: 1 PID: 1897 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   57.873848] Call trace:
[   57.876431] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   57.876443] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   57.876454] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   57.876462] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   57.876468] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   57.876476] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   57.876483] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   57.876492] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   57.876499] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   57.876505] ---[ end trace 1c3368bd4564d802 ]---
[   57.904619] [drm] phystopstateclklane is not ready.
[   57.904715] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   57.904717] [drm] mipi_init , exit success!
[   58.038175] ------------[ cut here ]------------
[   58.038210] WARNING: CPU: 3 PID: 1897 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   58.038225] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   58.038230] Modules linked in:
[   58.038238]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   58.038273] CPU: 3 PID: 1897 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   58.038280] Call trace:
[   58.040738] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   58.040748] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   58.040760] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   58.040770] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   58.040778] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   58.040786] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   58.040795] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   58.040806] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   58.040815] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   58.040820] ---[ end trace 1c3368bd4564d803 ]---
[   58.251403] ------------[ cut here ]------------
[   58.251435] WARNING: CPU: 3 PID: 1914 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   58.251448] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   58.251453] Modules linked in:
[   58.251460]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   58.251488] CPU: 3 PID: 1914 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   58.251494] Call trace:
[   58.254019] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   58.254028] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   58.254038] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   58.254047] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   58.254053] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   58.254060] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   58.254067] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   58.254077] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   58.254084] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   58.254090] ---[ end trace 1c3368bd4564d804 ]---
[   58.284888] [drm] phystopstateclklane is not ready.
[   58.284987] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   58.284989] [drm] mipi_init , exit success!
[   58.418532] ------------[ cut here ]------------
[   58.418566] WARNING: CPU: 0 PID: 1914 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   58.418582] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   58.418588] Modules linked in:
[   58.418595]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   58.418630] CPU: 0 PID: 1914 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   58.418636] Call trace:
[   58.421103] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   58.421113] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   58.421125] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   58.421135] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   58.421143] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   58.421152] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   58.421160] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   58.421172] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   58.421180] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   58.421187] ---[ end trace 1c3368bd4564d805 ]---
[   58.863814] ------------[ cut here ]------------
[   58.863850] WARNING: CPU: 1 PID: 1944 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   58.863865] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   58.863871] Modules linked in:
[   58.863879]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   58.863913] CPU: 1 PID: 1944 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   58.863920] Call trace:
[   58.866533] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   58.866542] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   58.866553] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   58.866561] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   58.866567] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   58.866576] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   58.866583] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   58.866593] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   58.866600] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   58.866608] ---[ end trace 1c3368bd4564d806 ]---
[   58.894625] [drm] phystopstateclklane is not ready.
[   58.894720] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   58.894722] [drm] mipi_init , exit success!
[   59.027673] ------------[ cut here ]------------
[   59.027703] WARNING: CPU: 0 PID: 1944 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   59.027723] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   59.027728] Modules linked in:
[   59.027734]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   59.027764] CPU: 0 PID: 1944 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   59.027770] Call trace:
[   59.030232] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   59.030240] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   59.030250] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   59.030259] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   59.030265] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   59.030272] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   59.030279] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   59.030289] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   59.030295] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   59.030300] ---[ end trace 1c3368bd4564d807 ]---
[   59.195730] ------------[ cut here ]------------
[   59.195762] WARNING: CPU: 1 PID: 1961 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   59.195775] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   59.195780] Modules linked in:
[   59.195787]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   59.195815] CPU: 1 PID: 1961 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   59.195821] Call trace:
[   59.198352] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   59.198363] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   59.198373] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   59.198382] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   59.198388] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   59.198397] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   59.198404] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   59.198414] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   59.198420] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   59.198427] ---[ end trace 1c3368bd4564d808 ]---
[   59.224618] [drm] phystopstateclklane is not ready.
[   59.224720] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   59.224722] [drm] mipi_init , exit success!
[   59.358490] ------------[ cut here ]------------
[   59.358520] WARNING: CPU: 0 PID: 1961 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   59.358533] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   59.358538] Modules linked in:
[   59.358544]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   59.358572] CPU: 0 PID: 1961 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   59.358577] Call trace:
[   59.361050] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   59.361059] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   59.361070] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   59.361078] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   59.361085] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   59.361091] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   59.361098] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   59.361108] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   59.361115] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   59.361120] ---[ end trace 1c3368bd4564d809 ]---
[   59.878458] ------------[ cut here ]------------
[   59.878490] WARNING: CPU: 5 PID: 1991 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   59.878503] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   59.878508] Modules linked in:
[   59.878514]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   59.878543] CPU: 5 PID: 1991 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   59.878548] Call trace:
[   59.881073] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   59.881082] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   59.881092] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   59.881100] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   59.881106] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   59.881115] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   59.881121] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   59.881131] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   59.881138] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   59.881144] ---[ end trace 1c3368bd4564d80a ]---
[   59.914720] [drm] phystopstateclklane is not ready.
[   59.914818] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   59.914820] [drm] mipi_init , exit success!
[   60.047318] ------------[ cut here ]------------
[   60.047353] WARNING: CPU: 2 PID: 1991 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   60.047368] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   60.047375] Modules linked in:
[   60.047381]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   60.047415] CPU: 2 PID: 1991 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   60.047422] Call trace:
[   60.049881] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   60.049890] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   60.049902] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   60.049913] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   60.049920] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   60.049929] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   60.049937] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   60.049949] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   60.049957] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   60.049964] ---[ end trace 1c3368bd4564d80b ]---
[   60.268213] ------------[ cut here ]------------
[   60.268245] WARNING: CPU: 1 PID: 2008 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   60.268257] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   60.268261] Modules linked in:
[   60.268268]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   60.268297] CPU: 1 PID: 2008 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   60.268303] Call trace:
[   60.270830] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   60.270839] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   60.270850] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   60.270858] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   60.270865] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   60.270872] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   60.270878] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   60.270888] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   60.270895] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   60.270900] ---[ end trace 1c3368bd4564d80c ]---
[   60.304732] [drm] phystopstateclklane is not ready.
[   60.304831] [drm] mipi_init,pixcel_clk=75,dphy_freq=641,hsa=42,hbp=117,hline=1760
[   60.304833] [drm] mipi_init , exit success!
[   60.440968] ------------[ cut here ]------------
[   60.440998] WARNING: CPU: 0 PID: 2008 at /media/scottb/linaro/hikey/source/linux/drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x168/0x16c()
[   60.441011] No drm_driver.set_busid() implementation provided by hisi_drm_driver. Use drm_dev_set_unique() to set the unique name explicitly.
[   60.441017] Modules linked in:
[   60.441023]  btwilink bluetooth wl18xx wlcore mac80211 cfg80211 mali rfkill st_drv wlcore_sdio
[   60.441052] CPU: 0 PID: 2008 Comm: Xorg Tainted: G        W      3.18.0linaro-hikey+ #3
[   60.441058] Call trace:
[   60.443520] [<ffffffc000088538>] dump_backtrace+0x0/0x124
[   60.443529] [<ffffffc00008866c>] show_stack+0x10/0x1c
[   60.443539] [<ffffffc000806bfc>] dump_stack+0x74/0xb8
[   60.443547] [<ffffffc0000afdb4>] warn_slowpath_common+0x90/0xb8
[   60.443554] [<ffffffc0000afe28>] warn_slowpath_fmt+0x4c/0x58
[   60.443560] [<ffffffc0004eaec4>] drm_setversion+0x164/0x16c
[   60.443567] [<ffffffc0004eaaa0>] drm_ioctl+0x254/0x4d0
[   60.443578] [<ffffffc0001d216c>] do_vfs_ioctl+0x368/0x5b0
[   60.443585] [<ffffffc0001d2434>] SyS_ioctl+0x80/0x98
[   60.443590] ---[ end trace 1c3368bd4564d80d ]---
[  169.649965] mmc1: card aaaa removed
[  171.599764] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 400000Hz, actual 390625HZ div = 32)
[  171.799743] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[  171.799955] mmc1: new SDHC card at address aaaa
[  171.801622] mmcblk1: mmc1:aaaa SS16G 14.8 GiB 
[  171.815169]  mmcblk1: p1
[  192.838749] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[  266.944666] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
