Hi Jorge,

On Thu, Mar 24, 2016 at 9:55 PM, Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> wrote:


 I am having issues getting the HiKey to enter bootloader mode by linking J15
 pins 1-2, 3-4 (the board always boots not matter what).

I had a similar, intermittent issue because I was using a switch to link 2-3 but the connector was designed for a larger size than the J15 header, so it would make a bad contact. Fixed by soldering the switch to the pins ;)
 

 is there any other way to reprogram the bootloader?

I think the bootloader is supposed to enter fastboot mode if you link J15 5-6.

HTH,
-- 
Jerome
 


NOTICE:  BL1: v1.1(release):e9b4909                                           �
NOTICE:  BL1: Built : 10:50:16, Nov 28 2015                                   �
NOTICE:  syspll frequency:1190494208Hz                                        �
NOTICE:  succeed to init lpddr3 rank0 dram phy                                �
INFO:    lpddr3_freq_init, set ddrc 533mhz                                    �
INFO:    init ddr3 rank0                                                      �
INFO:    ddr3 rank1 init pass                                                 �
INFO:    lpddr3_freq_init, set ddrc 800mhz                                    �
INFO:    init ddr3 rank0                                                      �
INFO:    ddr3 rank1 init pass                                                 �
INFO:    Elpida DDR                                                           �
NOTICE:  BL1: Booting BL2���������������
NOTICE:  acpu_dvfs_set_freq: set acpu freq success!NOTICE:  BL2:
v1.1(release):7fb9b0e
NOTICE:  BL2: Built : 07:52:28, Feb 26 2016try is highlighted.
NOTICE:  BL1: Booting BL3-1he selected OS, `e' to edit the commands
NOTICE:  BL3-1: v1.1(release):7fb9b0emand-line. ESC to return previous
NOTICE:  BL3-1: Built : 07:52:28, Feb 26INF [0x0]
TEE-CORE:init_primary_helper:329: Initializing (92db3e0 #1 Fri Feb 26 07:52:26
UTC 2016 aarch64)

  The highlighted entry will be executed automatically in 1s.
INF [0x0] TEE-CORE:init_teecore:81: teecore inits done
UEFI firmware (version PreAlpha built at 07:52:15 on Feb 26 2016)
_______________________________________________
Dev mailing list
Dev@lists.96boards.org
https://lists.96boards.org/mailman/listinfo/dev