What kind of SD media do you have?

On Oct 4, 2015, at 10:17 AM, Lee Jones <lee.jones@linaro.org> wrote:

Hooked up a serial cable and raised the loglevel.

For some reason the kernel isn't finding the SD card:


<snip>

Gave up waiting for root device.  Common problems:
- Boot args (cat /proc/cmdline)
  - Check rootdelay= (did the system wait long enough?)
  - Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT!  /dev/mmcblk1p2 does not exist.  Dropping to a shell!

(initramfs) cat /proc/cmdline
iommu_ddr_size=0x40000000 console=tty0 console=ttyAMA0,115200n8
root=/dev/mmcblk1p2 rootwait rw
 mem=908M  boardid=0x48696220,0x00000011,0x0000002b
thermal_trim=0x9a492400 pd_charge=0 boottype=defaultnormal
enter_recovery=0 androidboot.swtype=normal fastboot_version=
himntn=111111111111111111

(initramfs) ls /dev/mmc*
brw------- 1 0 0 179,  0 /dev/mmcblk0
brw------- 1 0 0 179, 64 /dev/mmcblk0boot0
brw------- 1 0 0 179,128 /dev/mmcblk0boot1
brw------- 1 0 0 179,  1 /dev/mmcblk0p1
brw------- 1 0 0 179,  2 /dev/mmcblk0p2
brw------- 1 0 0 179,  3 /dev/mmcblk0p3
brw------- 1 0 0 179,  4 /dev/mmcblk0p4
brw------- 1 0 0 179,  5 /dev/mmcblk0p5
brw------- 1 0 0 179,  6 /dev/mmcblk0p6
brw------- 1 0 0 179,  7 /dev/mmcblk0p7
brw------- 1 0 0 179,  8 /dev/mmcblk0p8
brw------- 1 0 0 179,  9 /dev/mmcblk0p9

On 3 October 2015 at 17:07, Fathi Boudra <fathi.boudra@linaro.org> wrote:
On 3 October 2015 at 16:06, Lee Jones <lee.jones@linaro.org> wrote:
After following the instructions in the Quick Start Guide for booting
from SD card I receive:

[tux.img][tux.img][tux.img][tux.img][tux.img][tux.img][tux.img][tux.img]
[STAMP] kvm [1]: HYP mode not available
[STAMP] of_dma_request_slave_channel: dma-names property of node
'/smb/uart@f8015000' missing or empty
[STAMP] hisi_thermal f7030700.tsensor: THERMAL ALARM: T > 80
<DEAD>

Has anyone else seen this?  Is it a known issue, or all-my-fault(tm)?

there's a known issue in the latest builds however build #323 should work.
https://bugs.96boards.org/show_bug.cgi?id=100

NB: This is 'hikey-jessie_alip_20150701-323.img'. Booting
'hikey-jessie_developer_20150701-323.emmc.img' from eMMC works fine.

Kind regards,
Lee

Cheers,
Fathi



-- 
Lee Jones
Linaro ST Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
Dev mailing list
Dev@lists.96boards.org
https://lists.96boards.org/mailman/listinfo/dev