On Wednesday, 30 March 2016, Michael Eager <eager@eagerm.com> wrote:
Thanks Grant --

The HiKeyUEFI instructions on how to flash to the eMMc say to attach
a PC to the UART to monitor the debug status.  The board does not have
a header for the UART installed at J16.  I don't know if this means
that the UART is not available or if I can add the header myself.

Am I looking at the correct instructions?   Is the serial port needed
to flash the firmware?

The UART is optional to reflash the board.

g.


On 03/30/2016 11:07 AM, Grant Likely wrote:
Hi Michael,

You'll want to flash using a USB cable to the latest firmware. See the
instructions on the 96Boards website.

g.

On Wed, Mar 30, 2016 at 10:54 AM, Michael Eager <eager@eagerm.com> wrote:
I have an HiKey Early Access Board which I assume is made by CircuitCo.

I have connected it to a HDMI display and USB keyboard/mouse.
When I plug in a 12v PS, and click on the power button, after a
few seconds LED 1 lights and stays on, LED 0 flashes a couple
times and goes out.

Nothing else happens.  I don't get any signal to the display.

Am I doing something wrong?  Any suggestions?

--
Michael Eager    eager@eagercon.com
1960 Park Blvd., Palo Alto, CA 94306  650-325-8077
_______________________________________________
Dev mailing list
Dev@lists.96boards.org
https://lists.96boards.org/mailman/listinfo/dev



--
Michael Eager    eager@eagercon.com
1960 Park Blvd., Palo Alto, CA 94306  650-325-8077