I did some more tests. It looks USB controller is gone. Neither host nor slave USB ports work. I checked in recovery, fastboot and linux. I'm able to flash l-loader using serial headers and boot the board. It works well with the exception of USB :(
milosz
On 13 January 2016 at 01:40, Guodong Xu guodong.xu@linaro.org wrote:
+Oldpan from LeMaker
Milosz, one more qestion, do you see any /dev/ttyUSB* on PC side when you try to flash that board?
-Guodong
On 13 January 2016 at 09:30, Guodong Xu guodong.xu@linaro.org wrote:
On 13 January 2016 at 02:39, Milosz Wasilewski milosz.wasilewski@linaro.org wrote:
Hi,
I'm trying to flash HiKey board using standard procedure but I'm not getting any signs of life on the host laptop after connecting the USB cable. I checked both recovery mode and fastboot.efi. I tested with 2 cables and different USB sockets on my laptop and USB hub. Has anyone seen the failure like this? The board is flashed with alip image and can boot just fine.
So, your board can boot into debian alip image well, but it fails to enter either recovery mode (jumper 3-4) or fastboot.efi (jumper 5-6) mode. I didn't hear this before.
When it boots into debian alip, can the OTG port work well?
-Guodong
Cheers, milosz _______________________________________________ Dev mailing list Dev@lists.96boards.org https://lists.96boards.org/mailman/listinfo/dev