Dev May 2015

dev@lists.96boards.org

15 participants
8 discussions

by Peter Griffin

Hi folks, For fun I've done a minimal U-Boot port for the HiKey board, I thought I'd post it here in case anyone else is interested. This work is based on top of Linus Walleij Juno port. The code can be found here: - ssh://git@git.linaro.org:/people/peter.griffin/u-boot Currently the port supports: - 1) Serial 2) eMMC (although only basic read testing) 3) USB (ASIX usb networking works, no mass storage) 4) GPIO So you have ATF -> u-boot -> kernel / your_own_rtos The main "useful" thing I suppose is the ability to quickly tftp kernels etc into DDR over the network. Obviously the ability to toggle the LEDs in u-boot is also something to amuse yourself with. Pre-built binaries can be found here: - http://people.linaro.org/~peter.griffin/hikey/hikey-u-boot-release_r1/ NB: These are built with the latest PSCI enabled ATF, so you also need to use the corresponding PSCI enabled kernel to get all 8 cores. The readme on how to replicate everything from source can be found here: - http://people.linaro.org/~peter.griffin/hikey/hikey-u-boot-release_r1/u-boo… . Any patches please send them along to me, one obvious missing feature is sdhci support. That doesn't look very hard to get going, as long as we can get the IP clocked and out of reset (and would be significantly easier if the published datasheet documented the registers...). Have Fun! regards, Peter. p.s. serial trace below debug EMMC boot: print init OK debug EMMC boot: send RST_N . debug EMMC boot: start eMMC boot...... load fastboot1! Switch to aarch64 mode. CPU0 executes at 0xf9801000! NOTICE: Booting Trusted Firmware NOTICE: BL1: v1.1(release):9a97502 NOTICE: BL1: Built : 08:13:36, Mar 10 2015 NOTICE: succeed to init lpddr3 rank0 dram phy INFO: lpddr3_freq_init, set ddrc 533mhz INFO: init ddr3 rank0 in 533MHz INFO: ddr3 rank1 init pass in 533MHz INFO: Elpida DDR NOTICE: BL1: Booting BL2 NOTICE: BL2: v1.1(debug):9a97502 NOTICE: BL2: Built : 10:22:35, Mar 17 2015 INFO: BL2: Loading BL3-1 INFO: Using FIP INFO: Loading file 'bl31.bin' at address 0xf9858000 INFO: File 'bl31.bin' loaded: 0xf9858000 - 0xf985f010 INFO: BL2: Loading BL3-3 INFO: Using FIP INFO: Loading file 'bl33.bin' at address 0x37000000 INFO: File 'bl33.bin' loaded: 0x37000000 - 0x3703db38 NOTICE: BL1: Booting BL3-1 NOTICE: BL3-1: v1.1(debug):9a97502 NOTICE: BL3-1: Built : 10:22:38, Mar 17 2015 INFO: BL3-1: Initializing runtime services INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address = 0x37000000 INFO: BL3-1: Next image spsr = 0x3c9 U-Boot 2015.04-rc1-00010-g49ec0dd (Mar 17 2015 - 10:11:00) hikey_aemv8a DRAM: 1 GiB MMC: HiKey DWMMC: 0 Using default environment In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 HiKey64# usb start starting USB... USB0: Core Release: 3.00a scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... Warning: asx0 using MAC address from net device 1 Ethernet Device(s) found HiKey64# HiKey64# setenv ipaddr 192.168.0.200 HiKey64# HiKey64# setenv serverip 192.168.0.10 HiKey64# HiKey64# tftpboot 0x10000000 Image Using asx0 device TFTP from server 192.168.0.10; our IP address is 192.168.0.200 Filename 'Image'. Load address: 0x10000000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################################T ########### ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################## 238.3 KiB/s done Bytes transferred = 12214232 (ba5fd8 hex) HiKey64# tftpboot 0x13000000 hi6220-hikey.dtb Using asx0 device TFTP from server 192.168.0.10; our IP address is 192.168.0.200 Filename 'hi6220-hikey.dtb'. Load address: 0x13000000 Loading: ################# 237.3 KiB/s done Bytes transferred = 85319 (14d47 hex) HiKey64# ï¿½ooti 0x10000000 - 0x13000000 Unknown command 'ï¿½ooti' - try 'help' HiKey64# Unknown command 'ï¿½ooti' - try 'help' HiKey64# booti 0x10000000 - 0x13000000 ## Flattened Device Tree blob at 13000000 Booting using the fdt blob at 0x13000000 Using Device Tree in place at 0000000013000000, end 0000000013017d46 Starting kernel ... [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.18.0+ (griffinp@griffinp-ThinkPad-X1-Carbon-2nd) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #5 SMP PREEMPT Tue Mar 17 08:21:27 GMT 2015 [ 0.000000] CPU: AArch64 Processor [410fd033] revision 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 16 MiB at 0x000000003f000000 [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] DMA zone: 3584 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] PERCPU: Embedded 14 pages/cpu @ffffffc03eefc000 s18688 r8192 d30464 u57344 [ 0.000000] pcpu-alloc: s18688 r8192 d30464 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258560 [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/sda1 rw earlyprintk=pl011,0x7ff80000 debug user_debug=31 loglevel=9 [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 28672 bytes [ 0.000000] log_buf_len min size: 16384 bytes [ 0.000000] log_buf_len: 65536 bytes [ 0.000000] early log buf free: 14752(90%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Memory: 994464K/1048576K available (7777K kernel code, 651K rwdata, 3116K rodata, 376K init, 492K bss, 54112K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000 ( 247 GB) [ 0.000000] vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000 ( 7 GB maximum) [ 0.000000] 0xffffffbe00000000 - 0xffffffbe00e00000 ( 14 MB actual) [ 0.000000] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB) [ 0.000000] fixed : 0xffffffbffbdfe000 - 0xffffffbffbdff000 ( 4 KB) [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) [ 0.000000] .init : 0xffffffc000b25000 - 0xffffffc000b83000 ( 376 KB) [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000b24564 ( 10898 KB) [ 0.000000] .data : 0xffffffc000b83000 - 0xffffffc000c25fd8 ( 652 KB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:64 nr_irqs:64 16 [ 0.000000] hisi_clk_register_stub: base=0xffffff8000002af4, comm_base=0xffffff8000008000 [ 0.000000] hisi_clk_init: base ffffff800000a000 [ 0.000000] hisi_clk_init: base ffffff800000c000 [ 0.000000] hisi_clk_init: base ffffff800000e000 [ 0.000000] hisi_clk_init: base ffffff8000010000 [ 0.000000] Architected cp15 timer(s) running at 1.20MHz (phys). [ 0.000005] sched_clock: 56 bits at 1200kHz, resolution 833ns, wraps every 3579139414016ns [ 0.000422] Console: colour dummy device 80x25 [ 0.001558] allocated 4194304 bytes of page_cgroup [ 0.001562] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.001575] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.40 BogoMIPS (lpj=12000) [ 0.001584] pid_max: default: 32768 minimum: 301 [ 0.001694] Security Framework initialized [ 0.001710] SELinux: Initializing. [ 0.001737] SELinux: Starting in permissive mode [ 0.001787] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.001794] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) [ 0.002309] Initializing cgroup subsys memory [ 0.002333] Initializing cgroup subsys freezer [ 0.002343] Initializing cgroup subsys hugetlb [ 0.002352] Initializing cgroup subsys debug [ 0.004190] /cpus/cpu@0: Missing clock-frequency property [ 0.004230] /cpus/cpu@1: Missing clock-frequency property [ 0.004269] /cpus/cpu@2: Missing clock-frequency property [ 0.004309] /cpus/cpu@3: Missing clock-frequency property [ 0.004350] /cpus/cpu@4: Missing clock-frequency property [ 0.004393] /cpus/cpu@5: Missing clock-frequency property [ 0.004437] /cpus/cpu@6: Missing clock-frequency property [ 0.004481] /cpus/cpu@7: Missing clock-frequency property [ 0.004517] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available [ 0.004545] EFI services will not be available. [ 0.079936] CPU1: Booted secondary processor [ 0.079944] Detected VIPT I-cache on CPU1 [ 0.099879] CPU2: Booted secondary processor [ 0.099882] Detected VIPT I-cache on CPU2 [ 0.119886] CPU3: Booted secondary processor [ 0.119889] Detected VIPT I-cache on CPU3 [ 0.139922] CPU4: Booted secondary processor [ 0.139929] Detected VIPT I-cache on CPU4 [ 0.159920] CPU5: Booted secondary processor [ 0.159924] Detected VIPT I-cache on CPU5 [ 0.179929] CPU6: Booted secondary processor [ 0.179932] Detected VIPT I-cache on CPU6 [ 0.199941] CPU7: Booted secondary processor [ 0.199944] Detected VIPT I-cache on CPU7 [ 0.200014] Brought up 8 CPUs [ 0.200049] SMP: Total of 8 processors activated. [ 0.200626] devtmpfs: initialized [ 0.204994] xor: measuring software checksum speed [ 0.299605] 8regs : 2381.600 MB/sec [ 0.399639] 8regs_prefetch: 2176.000 MB/sec [ 0.499674] 32regs : 2639.200 MB/sec [ 0.599708] 32regs_prefetch: 2321.600 MB/sec [ 0.599714] xor: using function: 32regs (2639.200 MB/sec) <snip>

8 years, 6 months

About xf86-video-armsoc integration

by Xinliang Liu

Hello, Recently, i am working on enabling mali 450 gpu at debian xorg X windows for hikey board which is one of 96boards <https://www.96boards.org/>. I first implement xf86-video-armsoc(ver1.1.0) video driver, compile and cp armsoc_drv.so to directory "/usr/lib/xorg/modules/drivers". And then compile arm mali r5p0 DDK and cp egl and gles libs(libEGL.so libEGL.so.1 libEGL.so.1.4 libGLESv1_CM.so libGLESv1_CM.so.1 libGLESv1_CM.so.1.1 libGLESv2.so libGLESv2.so.2 libGLESv2.so.2.0 libMali.so) to directory "/usr/lib/aarch64-linux-gnu/" or "/usr/lib". my xorg.conf is show as bellow: ----------------------------xorg.conf start-------------------------- cat /etc/X11/xorg.conf Section "Device" Identifier "Card0" Driver "armsoc" EndSection Section "Screen" Identifier "Screen0" Device "Card0" DefaultDepth 24 EndSection ----------------------------xorg.conf end-------------------------- Then i run startx, i can see the desktop on the monitor. But i found that the X process doesn't load any EGL and GLES libs by seeing the info of /proc/X process ID/task/*/smaps file. And even when i run #es2_info , i get bellow error: ----------------------------es2_info log start-------------------------- # es2_info [ 1010.459771] es2_info[1858]: unhandled level 3 translation fault (7) at 0x7f9dbe66b0, esr 0x92000047 [ 1010.468920] pgd = ffffffc03209b000 [ 1010.472324] [7f9dbe66b0] *pgd=000000003aad5003, *pud=000000003aad5003, *pmd=00000000384ae003, *pte=0000000000000000 [ 1010.482838] [ 1010.484335] CPU: 2 PID: 1858 Comm: es2_info Tainted: G W 3.18.0-linaro-hikey #37 [ 1010.492802] task: ffffffc032b28780 ti: ffffffc0329c0000 task.ti: ffffffc0329c0000 [ 1010.500322] PC is at 0x7f9dbfd744 [ 1010.503639] LR is at 0x7f9dbecbb0 [ 1010.507000] pc : [<0000007f9dbfd744>] lr : [<0000007f9dbecbb0>] pstate: 20000000 [ 1010.514402] sp : 0000007fffe87800 [ 1010.517764] x29: 0000007fffe87930 x28: 0000007f9dc0f570 [ 1010.523098] x27: 0000007fffe87bb0 x26: 0000007fffe87830 [ 1010.528473] x25: 0000000000000001 x24: 0000007fffe87b70 [ 1010.533806] x23: 0000000000000000 x22: 0000000000000002 [ 1010.539179] x21: 0000000000000006 x20: 0000007f9dc12000 [ 1010.544511] x19: 00000000002c9978 x18: 0000000000000000 [ 1010.549886] x17: 0000007f9dbfa8d0 x16: 0000007f9dc13000 [ 1010.555259] x15: 0000007f9dbfa338 x14: 0000007f9dbfa410 [ 1010.560594] x13: 00000000002ca6af x12: 0000000000007978 [ 1010.565965] x11: 0000007f9d91d000 x10: 0000007fffe87860 [ 1010.571299] x9 : 0000000000000004 x8 : 0000007f9dbe66b0 [ 1010.576672] x7 : 0000000000000000 x6 : 000000000000003f [ 1010.582006] x5 : 0000000000000040 x4 : 0000000000000010 [ 1010.587382] x3 : 00000000000002b8 x2 : 00000000000002b8 [ 1010.592716] x1 : 0000000000000000 x0 : 0000007f9dbe66b0 [ 1010.598088] Bus error ---------------------------es2_info log end-------------------------- What's wrong? Am I missing something on integrating xf86-video-armsoc? And why X doesn't load any EGL and GLES so libs? I paste the Xorg.0.log at the end. Please tell me if you know what's going wrong, thanks. Best regards, -Xinliang Liu ----------------------------Xorg.0.log start-------------------------- cat /var/log/Xorg.0.log [ 23.704] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 23.704] X Protocol Version 11, Revision 0 [ 23.704] Build Operating System: Linux 3.16.0-4-arm64 aarch64 Debian [ 23.704] Current Operating System: Linux linaro-alip 3.18.0-linaro-hikey #37 SMP PREEMPT Tue May 12 19:01:21 HKT 2015 aarch64 [ 23.704] Kernel command line: iommu_ddr_size=0x40000000 console=tty0 console=ttyAMA0,115200n8 loglevel=7 root=/dev/mmcblk0p7 rootwait rw mem=908M boardid=0x48696220,0x00000011,0x0000002b thermal_trim=0xb6aaaa09 pd_charge=0 boottype=defaultnormal enter_recovery=0 androidboot.swtype=normal fastboot_version= himn [ 23.704] Build Date: 11 February 2015 01:19:23AM [ 23.704] xorg-server 2:1.16.4-1 (http://www.debian.org/support) [ 23.704] Current version of pixman: 0.32.6 [ 23.704] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 23.704] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 23.705] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 12 09:11:51 2015 [ 23.705] (==) Using config file: "/etc/X11/xorg.conf" [ 23.705] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 23.706] (==) No Layout section. Using the first Screen section. [ 23.706] (**) |-->Screen "Screen0" (0) [ 23.706] (**) | |-->Monitor "<default monitor>" [ 23.707] (**) | |-->Device "Card0" [ 23.707] (==) No monitor specified for screen "Screen0". Using a default monitor configuration. [ 23.707] (==) Automatically adding devices [ 23.707] (==) Automatically enabling devices [ 23.707] (==) Automatically adding GPU devices [ 23.707] (WW) The directory "/usr/share/fonts/X11/misc" does not exist. [ 23.707] Entry deleted from font path. [ 23.707] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 23.707] Entry deleted from font path. [ 23.707] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 23.707] Entry deleted from font path. [ 23.707] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 23.707] Entry deleted from font path. [ 23.707] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist. [ 23.707] Entry deleted from font path. [ 23.707] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 23.707] Entry deleted from font path. [ 23.707] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 23.707] Entry deleted from font path. [ 23.707] (==) FontPath set to: built-ins [ 23.707] (==) ModulePath set to "/usr/lib/xorg/modules" [ 23.707] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 23.707] (II) Loader magic: 0x7fa49a7ce8 [ 23.707] (II) Module ABI versions: [ 23.707] X.Org ANSI C Emulation: 0.4 [ 23.707] X.Org Video Driver: 18.0 [ 23.708] X.Org XInput driver : 21.0 [ 23.708] X.Org Server Extension : 8.0 [ 23.708] (II) xfree86: Adding drm device (/dev/dri/card0) [ 23.709] (II) no primary bus or device found [ 23.709] falling back to /sys/devices/smb/smb:display-subsystem/drm/card0 [ 23.709] (II) LoadModule: "glx" [ 23.710] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 23.717] (II) Module glx: vendor="X.Org Foundation" [ 23.717] compiled for 1.16.4, module version = 1.0.0 [ 23.717] ABI class: X.Org Server Extension, version 8.0 [ 23.717] (==) AIGLX enabled [ 23.718] (II) LoadModule: "armsoc" [ 23.718] (II) Loading /usr/lib/xorg/modules/drivers/armsoc_drv.so [ 23.718] (II) Module armsoc: vendor="X.Org Foundation" [ 23.718] compiled for 1.16.4, module version = 1.1.0 [ 23.718] Module class: X.Org Video Driver [ 23.718] ABI class: X.Org Video Driver, version 18.0 [ 23.718] (II) ARMSOC: Driver for ARM Mali compatible chipsets [ 23.718] (++) using VT number 7 [ 23.719] (WW) Falling back to old probe method for armsoc [ 23.719] (II) No BusID or DriverName specified - opening /dev/dri/card0 [ 23.719] (II) Got BusID platform:smb:display-subsystem:00 [ 23.719] (II) Opened DRM [ 23.719] (II) DeviceName is [/dev/dri/card0] [ 23.719] (II) bus_id is [platform:smb:display-subsystem:00] [ 23.719] (II) DriverName is [hisi] [ 23.719] (II) version is [1.0.0] [ 23.719] (II) Screen:0, CRTC:-1 [ 23.720] (II) ARMSOC(0): Creating default Display subsection in Screen section "Screen0" for depth/fbbpp 24/32 [ 23.720] (**) ARMSOC(0): Depth 24, (--) framebuffer bpp 32 [ 23.720] (==) ARMSOC(0): RGB weight 888 [ 23.720] (==) ARMSOC(0): Using gamma correction (1.0, 1.0, 1.0) [ 23.720] (==) ARMSOC(0): Default visual is TrueColor [ 23.720] (II) No BusID or DriverName specified - opening /dev/dri/card0 [ 23.720] (II) Got BusID platform:smb:display-subsystem:00 [ 23.720] (II) Opened DRM [ 23.720] (II) DeviceName is [/dev/dri/card0] [ 23.720] (II) bus_id is [platform:smb:display-subsystem:00] [ 23.720] (II) DriverName is [hisi] [ 23.720] (II) version is [1.0.0] [ 23.720] (II) ARMSOC(0): Chipset: Mali [ 23.720] (II) ARMSOC(0): Buffer Flipping is Enabled [ 23.720] (II) ARMSOC(0): Setting the video modes ... [ 23.721] (II) ARMSOC(0): Adding all CRTCs [ 23.721] (II) ARMSOC(0): Got CRTC: 0 (id: 6) [ 23.725] (II) ARMSOC(0): Output HDMI-1 has no monitor section [ 23.730] (II) ARMSOC(0): Printing probed modes for output HDMI-1 [ 23.730] (II) ARMSOC(0): Modeline "1280x720"x60.6 75.00 1280 1500 1540 1650 720 740 745 750 -hsync -vsync (45.5 kHz e) [ 23.730] (II) ARMSOC(0): Output HDMI-1 connected [ 23.730] (II) ARMSOC(0): Using sloppy heuristic for initial modes [ 23.730] (II) ARMSOC(0): Output HDMI-1 using initial mode 1280x720 [ 23.730] (II) ARMSOC(0): Got KMS resources [ 23.730] (==) ARMSOC(0): DPI set to (96, 96) [ 23.730] (II) Loading sub module "dri2" [ 23.730] (II) LoadModule: "dri2" [ 23.730] (II) Module "dri2" already built-in [ 23.730] (II) Loading sub module "exa" [ 23.730] (II) LoadModule: "exa" [ 23.731] (II) Loading /usr/lib/xorg/modules/libexa.so [ 23.731] (II) Module exa: vendor="X.Org Foundation" [ 23.731] compiled for 1.16.4, module version = 2.6.0 [ 23.731] ABI class: X.Org Video Driver, version 18.0 [ 23.731] (II) Loading sub module "fb" [ 23.731] (II) LoadModule: "fb" [ 23.732] (II) Loading /usr/lib/xorg/modules/libfb.so [ 23.732] (II) Module fb: vendor="X.Org Foundation" [ 23.732] compiled for 1.16.4, module version = 1.0.0 [ 23.732] ABI class: X.Org ANSI C Emulation, version 0.4 [ 23.732] (--) Depth 24 pixmap format is 32 bpp [ 23.734] (II) ARMSOC(0): Soft EXA mode [ 23.734] (II) EXA(0): Driver allocated offscreen pixmaps [ 23.735] (II) EXA(0): Driver registered support for the following operations: [ 23.735] (II) Solid [ 23.735] (II) Copy [ 23.735] (II) Composite (RENDER acceleration) [ 23.735] (II) ARMSOC(0): Setting swap chain size: 2 [ 23.735] (II) ARMSOC(0): [DRI2] Setup complete [ 23.735] (II) ARMSOC(0): [DRI2] DRI driver: armsoc [ 23.735] (==) ARMSOC(0): Backing store enabled [ 23.735] (==) ARMSOC(0): Silken mouse enabled [ 23.735] (II) ARMSOC(0): HW cursor init() [ 23.735] (II) ARMSOC(0): HW cursor initialized [ 23.763] (II) ARMSOC(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 23.764] (==) ARMSOC(0): DPMS enabled [ 23.764] (--) RandR disabled [ 23.790] (II) SELinux: Disabled on system [ 23.793] (EE) AIGLX error: dlopen of /usr/lib/aarch64-linux-gnu/dri/armsoc_dri.so failed (/usr/lib/aarch64-linux-gnu/dri/armsoc_dri.so: cannot open shared object file: No su) [ 23.793] (EE) AIGLX: reverting to software rendering [ 23.793] (EE) AIGLX error: dlopen of /usr/lib/aarch64-linux-gnu/dri/swrast_dri.so failed (/usr/lib/aarch64-linux-gnu/dri/swrast_dri.so: cannot open shared object file: No su) [ 23.793] (EE) GLX: could not load software renderer [ 23.793] (II) GLX: no usable GL providers found for screen 0 [ 23.793] (II) ARMSOC(0): Setting screen physical size to 338 x 190 [ 23.880] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event0) [ 23.880] (**) USB OPTICAL MOUSE : Applying InputClass "evdev pointer catchall" [ 23.880] (II) LoadModule: "evdev" [ 23.881] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 23.882] (II) Module evdev: vendor="X.Org Foundation" [ 23.882] compiled for 1.16.0, module version = 2.9.0 [ 23.882] Module class: X.Org XInput Driver [ 23.882] ABI class: X.Org XInput driver, version 21.0 [ 23.882] (II) Using input driver 'evdev' for 'USB OPTICAL MOUSE ' [ 23.882] (**) USB OPTICAL MOUSE : always reports core events [ 23.882] (**) evdev: USB OPTICAL MOUSE : Device: "/dev/input/event0" [ 23.882] (--) evdev: USB OPTICAL MOUSE : Vendor 0x101 Product 0x7 [ 23.882] (--) evdev: USB OPTICAL MOUSE : Found 9 mouse buttons [ 23.883] (--) evdev: USB OPTICAL MOUSE : Found scroll wheel(s) [ 23.883] (--) evdev: USB OPTICAL MOUSE : Found relative axes [ 23.883] (--) evdev: USB OPTICAL MOUSE : Found x and y relative axes [ 23.883] (II) evdev: USB OPTICAL MOUSE : Configuring as mouse [ 23.883] (II) evdev: USB OPTICAL MOUSE : Adding scrollwheel support [ 23.883] (**) evdev: USB OPTICAL MOUSE : YAxisMapping: buttons 4 and 5 [ 23.883] (**) evdev: USB OPTICAL MOUSE : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 23.883] (**) Option "config_info" "udev:/sys/devices/f72c0000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:0101:0007.0001/input/input0/event0" [ 23.883] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE " (type: MOUSE, id 6) [ 23.883] (II) evdev: USB OPTICAL MOUSE : initialized for relative axes. [ 23.884] (**) USB OPTICAL MOUSE : (accel) keeping acceleration scheme 1 [ 23.884] (**) USB OPTICAL MOUSE : (accel) acceleration profile 0 [ 23.884] (**) USB OPTICAL MOUSE : (accel) acceleration factor: 2.000 [ 23.884] (**) USB OPTICAL MOUSE : (accel) acceleration threshold: 4 [ 23.885] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0) [ 23.885] (II) No input driver specified, ignoring this device. [ 23.885] (II) This device may have been added with another device file. [ 23.886] (II) config/udev: Adding input device SIGMACHIP USB Keyboard (/dev/input/event1) [ 23.886] (**) SIGMACHIP USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 23.886] (II) Using input driver 'evdev' for 'SIGMACHIP USB Keyboard' [ 23.886] (**) SIGMACHIP USB Keyboard: always reports core events [ 23.886] (**) evdev: SIGMACHIP USB Keyboard: Device: "/dev/input/event1" [ 23.886] (--) evdev: SIGMACHIP USB Keyboard: Vendor 0x1c4f Product 0x2 [ 23.886] (--) evdev: SIGMACHIP USB Keyboard: Found keys [ 23.886] (II) evdev: SIGMACHIP USB Keyboard: Configuring as keyboard [ 23.887] (**) Option "config_info" "udev:/sys/devices/f72c0000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:1C4F:0002.0002/input/input1/event1" [ 23.887] (II) XINPUT: Adding extended input device "SIGMACHIP USB Keyboard" (type: KEYBOARD, id 7) [ 23.887] (**) Option "xkb_rules" "evdev" [ 23.887] (**) Option "xkb_model" "pc105" [ 23.887] (**) Option "xkb_layout" "us" [ 23.889] (II) config/udev: Adding input device SIGMACHIP USB Keyboard (/dev/input/event2) [ 23.889] (**) SIGMACHIP USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 23.889] (II) Using input driver 'evdev' for 'SIGMACHIP USB Keyboard' [ 23.889] (**) SIGMACHIP USB Keyboard: always reports core events [ 23.889] (**) evdev: SIGMACHIP USB Keyboard: Device: "/dev/input/event2" [ 23.889] (--) evdev: SIGMACHIP USB Keyboard: Vendor 0x1c4f Product 0x2 [ 23.889] (--) evdev: SIGMACHIP USB Keyboard: Found 1 mouse buttons [ 23.889] (--) evdev: SIGMACHIP USB Keyboard: Found scroll wheel(s) [ 23.889] (--) evdev: SIGMACHIP USB Keyboard: Found relative axes [ 23.889] (II) evdev: SIGMACHIP USB Keyboard: Forcing relative x/y axes to exist. [ 23.889] (--) evdev: SIGMACHIP USB Keyboard: Found absolute axes [ 23.889] (II) evdev: SIGMACHIP USB Keyboard: Forcing absolute x/y axes to exist. [ 23.889] (--) evdev: SIGMACHIP USB Keyboard: Found keys [ 23.889] (II) evdev: SIGMACHIP USB Keyboard: Configuring as mouse [ 23.889] (II) evdev: SIGMACHIP USB Keyboard: Configuring as keyboard [ 23.889] (II) evdev: SIGMACHIP USB Keyboard: Adding scrollwheel support [ 23.889] (**) evdev: SIGMACHIP USB Keyboard: YAxisMapping: buttons 4 and 5 [ 23.889] (**) evdev: SIGMACHIP USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 23.890] (**) Option "config_info" "udev:/sys/devices/f72c0000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:1C4F:0002.0003/input/input2/event2" [ 23.890] (II) XINPUT: Adding extended input device "SIGMACHIP USB Keyboard" (type: KEYBOARD, id 8) [ 23.890] (**) Option "xkb_rules" "evdev" [ 23.890] (**) Option "xkb_model" "pc105" [ 23.890] (**) Option "xkb_layout" "us" [ 23.890] (II) evdev: SIGMACHIP USB Keyboard: initialized for relative axes. [ 23.890] (WW) evdev: SIGMACHIP USB Keyboard: ignoring absolute axes. [ 23.891] (**) SIGMACHIP USB Keyboard: (accel) keeping acceleration scheme 1 [ 23.891] (**) SIGMACHIP USB Keyboard: (accel) acceleration profile 0 [ 23.891] (**) SIGMACHIP USB Keyboard: (accel) acceleration factor: 2.000 [ 23.891] (**) SIGMACHIP USB Keyboard: (accel) acceleration threshold: 4 [ 24.324] (II) evdev: SIGMACHIP USB Keyboard: Close [ 24.325] (II) UnloadModule: "evdev" [ 24.325] (II) evdev: SIGMACHIP USB Keyboard: Close [ 24.326] (II) UnloadModule: "evdev" [ 24.326] (II) evdev: USB OPTICAL MOUSE : Close [ 24.326] (II) UnloadModule: "evdev" [ 24.332] (EE) Server terminated successfully (0). Closing log file. ----------------------------Xorg.0.log end---------------------------

8 years, 11 months

HiKey and JTAG debugger

by Peter Griffin

Hi folks, Has anyone used the HiKey board (or hi6220 reference board) with a JTAG debugger like Lauterbach Trace32? If so I would be interested in seeing a copy of any configuration / scripts you used to get it going. regards, Peter.

8 years, 11 months

UEFI wiki need some love

by Kevin Hilman

https://github.com/96boards/documentation/wiki/UEFI Trying to get UEFI booting via this wiki didn't really work well. I had to check with several others to get things actually working. A couple major things I found in the last day or so: 1) it mentions the ptable.img file, but doesn't say where to find it 2) It mentions starting fastboot from UEFI, which requires your boot-uefi.img have a fastboot application on it. However, the wiki guides you through creating a boot-uefi.img with a kernel/dtb/initrd but no fastboot.efi, so trying to start fastboot from the shell doesn't work. Kevin

8 years, 11 months

UEFI boot: hangs at UEFI shell

by Kevin Hilman

Following the wiki[1], I tried to flash a UEFI setup, but it's hanging as soon as I try to enter the shell[2]. Any ideas what's going on? Also, it seems that wiki may need a refresh. The link to the nvme.img is broken, but I found one from the "latest"dir. Also, according to Tyler/Fathi, it seems should be using the ptable.img from http://builds.96boards.org/snapshots/hikey/binaries/20150505? Anyways, any pointers or wiki updates that would help me actually use EFI would be most helpful. Kevin [1] https://github.com/96boards/documentation/wiki/UEFI [2] debug EMMC boot: print init OK debug EMMC boot: send RST_N . debug EMMC boot: start eMMC boot...... load fastboot1! Switch to aarch64 mode. CPU0 executes at 0xf9801000! NOTICE: Booting Trusted Firmware NOTICE: BL1: v1.1(release):b6cfb3ed2eb4 NOTICE: BL1: Built : 16:02:44, May 8 2015 NOTICE: succeed to init lpddr3 rank0 dram phy INFO: lpddr3_freq_init, set ddrc 533mhz INFO: init ddr3 rank0 INFO: ddr3 rank1 init pass INFO: lpddr3_freq_init, set ddrc 800mhz INFO: init ddr3 rank0 INFO: ddr3 rank1 init pass INFO: Elpida DDR NOTICE: BL1: Booting BL2 NOTICE: acpu_dvfs_set_freq: set acpu freq success!NOTICE: BL2: v1.1(release):b6cfb3ed2eb4 NOTICE: BL2: Built : 16:02:46, May 8 2015 ERROR: Failed to load BL3-0 (-1) ERROR: Please burn mcu image: ERROR: sudo fastboot flash mcuimage mcuimage.bin NOTICE: BL1: Booting BL3-1 NOTICE: BL3-1: v1.1(release):b6cfb3ed2eb4 NOTICE: BL3-1: Built : 16:02:48, May 8 2015 UEFI firmware (version PreAlpha built at 16:02:31 on May 8 2015) 3h3h3h3hThe default boot selection will start in 10 seconds.. [1] Linux from eMMC [2] Shell [3] Boot Manager Start: 2

8 years, 11 months

[meta-96boards][PATCH] l-loader: Express the dependency on edk2 deloy task

by Khem Raj

We avoid the build races like below | cp: cannot stat '/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/../../deploy/glibc/images/hikey/bl1.bin': No such file or directory Signed-off-by: Khem Raj <raj.khem(a)gmail.com> --- recipes-bsp/l-loader/l-loader_git.bb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/recipes-bsp/l-loader/l-loader_git.bb b/recipes-bsp/l-loader/l-loader_git.bb index b0cbb20..bf3aa70 100644 --- a/recipes-bsp/l-loader/l-loader_git.bb +++ b/recipes-bsp/l-loader/l-loader_git.bb @@ -3,7 +3,7 @@ SUMMARY = "Loader to switch from aarch32 to aarch64 and boot" LICENSE = "GPLv2" LIC_FILES_CHKSUM = "file://COPYING;md5=e8c1458438ead3c34974bc0be3a03ed6" -DEPENDS = "edk2" +do_configure[depends] = "edk2:do_deploy" inherit deploy pythonnative -- 2.1.4

8 years, 11 months

[meta-96boards][PATCH] edk2: Fix build on OE

by Khem Raj

"-Wno-error=unused-result" is added to BUILD_CFLAGS to bypass ubuntu check for fread return not being checked. Use BUILD_* variables for native compilation instead of hardcoding the tools Signed-off-by: Khem Raj <raj.khem(a)gmail.com> --- .../uefi/edk2/0001-Check-the-result-of-fread.patch | 42 ++++++++++++++++++++++ ...OE-to-let-it-provide-its-own-native-sysro.patch | 35 ++++++++++++++++++ recipes-bsp/uefi/edk2_git.bb | 5 +++ 3 files changed, 82 insertions(+) create mode 100644 recipes-bsp/uefi/edk2/0001-Check-the-result-of-fread.patch create mode 100644 recipes-bsp/uefi/edk2/0001-accomodate-OE-to-let-it-provide-its-own-native-sysro.patch diff --git a/recipes-bsp/uefi/edk2/0001-Check-the-result-of-fread.patch b/recipes-bsp/uefi/edk2/0001-Check-the-result-of-fread.patch new file mode 100644 index 0000000..5bcfd4f --- /dev/null +++ b/recipes-bsp/uefi/edk2/0001-Check-the-result-of-fread.patch @@ -0,0 +1,42 @@ +From fd11433c7ba4d78da765c80b32eca63a8abe436d Mon Sep 17 00:00:00 2001 +From: Khem Raj <raj.khem(a)gmail.com> +Date: Fri, 8 May 2015 00:30:53 -0700 +Subject: [PATCH] Check the result of fread() + +Fixes build errors on newer ubuntu machines + +| SimpleFileParsing.c: In function 'ProcessFile': +| SimpleFileParsing.c:705:3: error: ignoring return value of 'fread', +declared with attribute warn_unused_result [-Werror=unused-result] +| fread ((VOID *) SourceFile->FileBuffer, SourceFile->FileSize, 1, +SourceFile->Fptr); +| ^ +| cc1: all warnings being treated as errors +| ../Makefiles/footer.makefile:27: recipe for target +'SimpleFileParsing.o' failed + +Signed-off-by: Khem Raj <raj.khem(a)gmail.com> +--- + BaseTools/Source/C/Common/SimpleFileParsing.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +diff --git a/BaseTools/Source/C/Common/SimpleFileParsing.c b/BaseTools/Source/C/Common/SimpleFileParsing.c +index 877bb6f..d11ac38 100644 +--- a/BaseTools/Source/C/Common/SimpleFileParsing.c ++++ b/BaseTools/Source/C/Common/SimpleFileParsing.c +@@ -702,7 +702,11 @@ Returns: + return STATUS_ERROR; + } + +- fread ((VOID *) SourceFile->FileBuffer, SourceFile->FileSize, 1, SourceFile->Fptr); ++ size_t sz = fread ((VOID *) SourceFile->FileBuffer, SourceFile->FileSize, 1, SourceFile->Fptr); ++ if (sz != SourceFile->FileSize) { ++ Error (NULL, 0, 4001, "Resource: Unable to read data from file", NULL); ++ return STATUS_ERROR; ++ } + SourceFile->FileBuffer[(SourceFile->FileSize / sizeof (CHAR8 ))] = T_CHAR_NULL; + // + // Pre-process the file to replace comments with spaces +-- +2.1.4 + diff --git a/recipes-bsp/uefi/edk2/0001-accomodate-OE-to-let-it-provide-its-own-native-sysro.patch b/recipes-bsp/uefi/edk2/0001-accomodate-OE-to-let-it-provide-its-own-native-sysro.patch new file mode 100644 index 0000000..e7feded --- /dev/null +++ b/recipes-bsp/uefi/edk2/0001-accomodate-OE-to-let-it-provide-its-own-native-sysro.patch @@ -0,0 +1,35 @@ +From f22bad85283f8cdb15e0b508c44c181e33cb5296 Mon Sep 17 00:00:00 2001 +From: Khem Raj <raj.khem(a)gmail.com> +Date: Fri, 8 May 2015 00:18:05 -0700 +Subject: [PATCH] accomodate OE to let it provide its own native sysroot + +We need util-linux for uuid stuff from build host otherwise + +Signed-off-by: Khem Raj <raj.khem(a)gmail.com> +--- + BaseTools/Source/C/Makefiles/header.makefile | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +Index: git/BaseTools/Source/C/Makefiles/header.makefile +=================================================================== +--- git.orig/BaseTools/Source/C/Makefiles/header.makefile ++++ git/BaseTools/Source/C/Makefiles/header.makefile +@@ -21,12 +21,12 @@ CYGWIN:=$(findstring CYGWIN, $(shell una + LINUX:=$(findstring Linux, $(shell uname -s)) + DARWIN:=$(findstring Darwin, $(shell uname -s)) + +-CC = gcc +-CXX = g++ +-AS = gcc +-AR = ar +-LD = ld +-LINKER ?= $(CC) ++CC = $(BUILD_CC) $(BUILD_CFLAGS) ++CXX = $(BUILD_CXX) ++AS = $(BUILD_GCC) ++AR = $(BUILD_AR) ++LD = $(BUILD_LD) $(BUILD_LDFLAGS) ++LINKER ?= $(CC) $(BUILD_LDFLAGS) + ifeq ($(ARCH), IA32) + ARCH_INCLUDE = -I $(MAKEROOT)/Include/Ia32/ + endif diff --git a/recipes-bsp/uefi/edk2_git.bb b/recipes-bsp/uefi/edk2_git.bb index dd20d62..adf9863 100644 --- a/recipes-bsp/uefi/edk2_git.bb +++ b/recipes-bsp/uefi/edk2_git.bb @@ -4,6 +4,8 @@ LICENSE = "BSD" LIC_FILES_CHKSUM = "file://BaseTools/License.txt;md5=a041d47c90fd51b4514d09a5127210e6 \ " +DEPENDS += "util-linux-native" + inherit deploy PV = "0.0+${SRCPV}" @@ -23,6 +25,8 @@ SRCREV_uefitools = "1a4887ae459b4c6242ac94fc5342c6c7200fb66c" SRC_URI = "git://github.com/96boards/edk2.git;name=edk2;branch=${EDKBRANCH} \ git://github.com/96boards/arm-trusted-firmware.git;name=atf;branch=${ATFBRA… \ git://git.linaro.org/uefi/uefi-tools.git;name=uefitools;destsuffix=git/uefi… \ + file://0001-accomodate-OE-to-let-it-provide-its-own-native-sysro.patch \ + file://0001-Check-the-result-of-fread.patch \ " S = "${WORKDIR}/git" @@ -36,6 +40,7 @@ export CROSS_COMPILE_32 = "${TARGET_PREFIX}" # Workaround a gcc 4.9 feature # https://lists.96boards.org/pipermail/dev/2015-March/000146.html CFLAGS = " -fno-delete-null-pointer-checks" +BUILD_CFLAGS += "-Wno-error=unused-result" # This is a bootloader, so unset OE LDFLAGS. # OE assumes ld==gcc and passes -Wl,foo -- 2.1.4

8 years, 11 months

hikey gpu driver need help

by Xinliang Liu

Hello, when i load the kernel mali.ko and user mali so into hikey board. i encounter one kernel WARNING and one kernel oops. Through the call trace and the PC address, with addr2line tool (e.g. aarch64-linux-android-addr2line -e vmlinux ffffffc0006965b8) i could address the *WARNING* at line 433 of file:drivers/staging/android/sync.c:433 And the *oops* at line 434, as show bellow: 425 static void android_fence_release(struct fence *fence) 426 { 427 struct sync_pt *pt = container_of(fence, struct sync_pt, base); 428 struct sync_timeline *parent = sync_pt_parent(pt); 429 unsigned long flags; 430 431 spin_lock_irqsave(fence->lock, flags); 432 list_del(&pt->child_list); 433 if (WARN_ON_ONCE(!list_empty(&pt->active_list))) 434 list_del(&pt->active_list); I paste the kernel and logcat log bellow. Anybody knows what wrong it is? Currently, the hikey kernel version is 3.18. And the mali r5p0 DDK, which i use on hikey, is work with our product kernel 3.10. Is there any kernel include file used in DDK needed to be update? I am not so familiar with mali DDK. i don't know what the problem is now. --------------------------------------------------------kernel log begin------------------------------------------------- [ 31.165612] [drm] mipi_init,pixcel_clk=75,lane_byte_clk=80,hsa=42,hbp=117,hline=1760[ 31.165661] [drm] mipi_init , exit success! [ 38.106713] ------------[ cut here ]------------ [ 38.111394] WARNING: CPU: 0 PID: 1442 at /home/liuxl/work/android/hikey-android/kernel/linaro/hisilicon/drivers/staging/android/sync.c:433 android_fence_release+0xf0/0x100() [ 38.119414] ------------[ cut here ]------------ [ 38.119429] WARNING: CPU: 2 PID: 1397 at /home/liuxl/work/android/hikey-android/kernel/linaro/hisilicon/drivers/staging/android/sync.c:433 android_fence_release+0xf0/0x100() [ 38.119457] Modules linked in: mali gator btwilink tty_hci st_drv rfcomm hidp bluetooth wlcore_sdio wl18xx wlcore mac80211 cfg80211 rfkill [ 38.119464] CPU: 2 PID: 1397 Comm: surfaceflinger Tainted: G W 3.18.0-linaro-hikey #3 [ 38.119466] Call trace: [ 38.119476] [<ffffffc000088584>] dump_backtrace+0x0/0x124 [ 38.119481] [<ffffffc0000886b8>] show_stack+0x10/0x1c [ 38.119489] [<ffffffc000813b08>] dump_stack+0x74/0xb8 [ 38.119495] [<ffffffc0000aff00>] warn_slowpath_common+0x90/0xb8 [ 38.119498] [<ffffffc0000affec>] warn_slowpath_null+0x14/0x20 [ 38.119502] [<ffffffc0006965e4>] android_fence_release+0xec/0x100 [ 38.119509] [<ffffffc000530dcc>] fence_release+0x48/0x108 [ 38.119513] [<ffffffc000696814>] sync_fence_free+0x88/0xb4 [ 38.119517] [<ffffffc000696874>] sync_fence_release+0x34/0x48 [ 38.119524] [<ffffffc0001c2818>] __fput+0x8c/0x1d0 [ 38.119528] [<ffffffc0001c29b0>] ____fput+0x8/0x14 [ 38.119534] [<ffffffc0000ca728>] task_work_run+0x94/0xec [ 38.119538] [<ffffffc000088144>] do_notify_resume+0x54/0x68 [ 38.119540] ---[ end trace c5a5447c4b70f5e2 ]--- [ 38.119554] Unable to handle kernel paging request at virtual address 00100108 [ 38.119555] pgd = ffffffc033dbb000 [ 38.119560] [00100108] *pgd=0000000000000000, *pud=0000000000000000 [ 38.119565] Internal error: Oops: 96000045 [#1] PREEMPT SMP [ 38.119582] Modules linked in: mali gator btwilink tty_hci st_drv rfcomm hidp bluetooth wlcore_sdio wl18xx wlcore mac80211 cfg80211 rfkill [ 38.119586] CPU: 2 PID: 1397 Comm: surfaceflinger Tainted: G W 3.18.0-linaro-hikey #3 [ 38.119590] task: ffffffc0359fe2c0 ti: ffffffc030a78000 task.ti: ffffffc030a78000 [ 38.119593] PC is at android_fence_release+0xc0/0x100 [ 38.119596] LR is at android_fence_release+0xf0/0x100 [ 38.119600] pc : [<ffffffc0006965b8>] lr : [<ffffffc0006965e8>] pstate: 800001c5 [ 38.119601] sp : ffffffc030a7bd70 [ 38.119605] x29: ffffffc030a7bd70 x28: ffffffc030a78000 [ 38.119610] x27: ffffffc000bbd000 x26: 0000000000000039 [ 38.119613] x25: 0000000000000119 x24: ffffffc000c3f11f [ 38.119617] x23: 0000000000000140 x22: ffffffc0351c7828 [ 38.119620] x21: ffffffc034f585c0 x20: ffffffc034f58610 [ 38.119625] x19: ffffffc0351c77c0 x18: 0000007fb7f84830 [ 38.119628] x17: 0000007fb7f12f0c x16: ffffffc0001bec3c [ 38.119631] x15: 0000000000000000 x14: 0ffffffffffffffd [ 38.119635] x13: 0000000000000010 x12: ffffffc000890000 [ 38.119639] x11: ffffffc000bc8000 x10: ffffffc000c4bd30 [ 38.119643] x9 : 0000000000000001 x8 : ffffffc037b3fda8 [ 38.119646] x7 : 0000000000000000 x6 : ffffffc037b3fda8 [ 38.119650] x5 : ffffffc037b3fe00 x4 : 0000000000000002 [ 38.119654] x3 : 0000000000200200 x2 : 0000000000100100 [ 38.119657] x1 : 0000000000000100 x0 : 0000000000000001 [ 38.119658] [ 38.119661] Process surfaceflinger (pid: 1397, stack limit = 0xffffffc030a78058) [ 38.119665] Stack: (0xffffffc030a7bd70 to 0xffffffc030a7c000) [ 38.119669] bd60: 30a7bdb0 ffffffc0 00530dd0 ffffffc0 [ 38.119675] bd80: 3589ba00 ffffffc0 351c77c0 ffffffc0 3589ba00 ffffffc0 00000000 00000000 [ 38.119680] bda0: 07f7b498 ffffffc0 32e7b010 ffffffc0 30a7bdd0 ffffffc0 00696818 ffffffc0 [ 38.119686] bdc0: 3589ba00 ffffffc0 00000000 00000000 30a7be00 ffffffc0 00696878 ffffffc0 [ 38.119692] bde0: 3589ba00 ffffffc0 00000010 00000000 3637a008 ffffffc0 35277d60 ffffffc0 [ 38.119697] be00: 30a7be20 ffffffc0 001c281c ffffffc0 32e7b000 ffffffc0 00000000 00000000 [ 38.119703] be20: 30a7be70 ffffffc0 001c29b4 ffffffc0 359fece0 ffffffc0 00000000 00000000 [ 38.119708] be40: 00c4b000 ffffffc0 359fe2c0 ffffffc0 00000000 00000000 00000015 00000000 [ 38.119713] be60: 30a7be90 ffffffc0 00000000 00000000 30a7be80 ffffffc0 000ca72c ffffffc0 [ 38.119719] be80: 30a7beb0 ffffffc0 00088148 ffffffc0 00000004 00000000 b70075b8 0000007f [ 38.119724] bea0: ffffffff ffffffff b7f12f14 0000007f ffffe2a0 0000007f 0008433c ffffffc0 [ 38.119730] bec0: 00000000 00000000 0008429c ffffffc0 00000000 00000000 00000000 00000000 [ 38.119735] bee0: b70075b8 0000007f 00000001 00000000 00000000 00000000 00000002 00000000 [ 38.119740] bf00: b7008668 0000007f b70075c0 0000007f 00000039 00000000 000000e7 00000000 [ 38.119745] bf20: b7f73000 0000007f b70023e8 0000007f 00000003 00000000 b7f73000 0000007f [ 38.119751] bf40: b7f80000 0000007f 00000000 00000000 b7bb5f08 0000007f b7f12f0c 0000007f [ 38.119756] bf60: b7f84830 0000007f b70075b8 0000007f b70075b8 0000007f 00000000 00000000 [ 38.119761] bf80: ffffe2f8 0000007f 00000019 00000000 00000000 00000000 b7eb4030 0000007f [ 38.119766] bfa0: 00000000 00000000 b71420c0 0000007f b7f79710 0000007f ffffe2a0 0000007f [ 38.119772] bfc0: b7c21954 0000007f ffffe2a0 0000007f b7f12f14 0000007f 00000000 00000000 [ 38.119777] bfe0: 00000019 00000000 00000039 00000000 00000309 00000000 00500000 00000000 [ 38.119778] Call trace: [ 38.119782] [<ffffffc0006965b8>] android_fence_release+0xc0/0x100 [ 38.119786] [<ffffffc000530dcc>] fence_release+0x48/0x108 [ 38.119790] [<ffffffc000696814>] sync_fence_free+0x88/0xb4 [ 38.119794] [<ffffffc000696874>] sync_fence_release+0x34/0x48 [ 38.119798] [<ffffffc0001c2818>] __fput+0x8c/0x1d0 [ 38.119801] [<ffffffc0001c29b0>] ____fput+0x8/0x14 [ 38.119805] [<ffffffc0000ca728>] task_work_run+0x94/0xec [ 38.119809] [<ffffffc000088144>] do_notify_resume+0x54/0x68 [ 38.119814] Code: 39400700 34000160 f94006c3 d2802001 (f9000443) [ 38.119819] ---[ end trace c5a5447c4b70f5e3 ]--- [ 38.119822] Kernel panic - not syncing: Fatal exception [ 38.119829] CPU4: stopping [ 38.119835] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G D W 3.18.0-linaro-hikey #3 [ 38.119836] Call trace: [ 38.119843] [<ffffffc000088584>] dump_backtrace+0x0/0x124 [ 38.119848] [<ffffffc0000886b8>] show_stack+0x10/0x1c [ 38.119853] [<ffffffc000813b08>] dump_stack+0x74/0xb8 [ 38.119858] [<ffffffc000091144>] handle_IPI+0x1c0/0x288 [ 38.119862] [<ffffffc0000812cc>] gic_handle_irq+0x78/0x80 [ 38.119865] Exception stack(0xffffffc03654be20 to 0xffffffc03654bf40) [ 38.119871] be20: 00000004 00000000 36548000 ffffffc0 3654bf60 ffffffc0 000851a8 ffffffc0 [ 38.119876] be40: 00000000 00000000 00a74e38 ffffffc0 3654bf00 ffffffc0 36548000 ffffffc0 [ 38.119882] be60: 00000001 00000000 00000010 00000000 33e57e18 ffffffc0 37b7cf50 ffffffc0 [ 38.119887] be80: 00000ffc 00000000 00000003 00000000 00000ffc 00000000 00000005 00000000 [ 38.119892] bea0: 008299f0 ffffffc0 b7f73000 0000007f b7f80000 0000007f 35e52b0c 8481d413 [ 38.119897] bec0: 001d2e4c ffffffc0 b7f39420 0000007f b7f84830 0000007f 00000004 00000000 [ 38.119903] bee0: 36548000 ffffffc0 00c48610 ffffffc0 00c40000 ffffffc0 00c4bb60 ffffffc0 [ 38.119908] bf00: 00828000 ffffffc0 00af3a10 ffffffc0 00c3ef61 ffffffc0 00a622d8 ffffffc0 [ 38.119914] bf20: 00000001 00000000 3654bf60 ffffffc0 000851a4 ffffffc0 3654bf60 ffffffc0 [ 38.119919] [<ffffffc000083da0>] el1_irq+0x60/0xd0 [ 38.119926] [<ffffffc0000e6e48>] cpu_startup_entry+0x184/0x228 [ 38.119930] [<ffffffc000090c04>] secondary_start_kernel+0x110/0x120 [ 38.119933] CPU1: stopping [ 38.119937] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D W 3.18.0-linaro-hikey #3 [ 38.119939] Call trace: [ 38.119944] [<ffffffc000088584>] dump_backtrace+0x0/0x124 [ 38.119949] [<ffffffc0000886b8>] show_stack+0x10/0x1c [ 38.119952] [<ffffffc000813b08>] dump_stack+0x74/0xb8 [ 38.119956] [<ffffffc000091144>] handle_IPI+0x1c0/0x288 [ 38.119960] [<ffffffc0000812cc>] gic_handle_irq+0x78/0x80 [ 38.119963] Exception stack(0xffffffc0364fbe20 to 0xffffffc0364fbf40) [ 38.119969] be20: 00000001 00000000 364f8000 ffffffc0 364fbf60 ffffffc0 000851a8 ffffffc0 [ 38.119974] be40: 00000000 00000000 00a74e38 ffffffc0 364fbf00 ffffffc0 364f8000 ffffffc0 [ 38.119980] be60: 00000001 00000000 00000001 00000000 ff282e00 000d1cee e014a0f1 00000008 [ 38.119985] be80: 364f07d0 ffffffc0 364fbd70 ffffffc0 00000ffc 00000000 00000001 00000000 [ 38.119990] bea0: 00000050 00000000 00000005 00000000 00000016 00000000 00400000 00000000 [ 38.119995] bec0: 001d2e4c ffffffc0 b7f39420 0000007f 00400000 00000000 00000001 00000000 [ 38.120000] bee0: 364f8000 ffffffc0 00c48610 ffffffc0 00c40000 ffffffc0 00c4bb60 ffffffc0 [ 38.120006] bf00: 00828000 ffffffc0 00af3a10 ffffffc0 00c3ef61 ffffffc0 00a622d8 ffffffc0 [ 38.120011] bf20: 00000001 00000000 364fbf60 ffffffc0 000851a4 ffffffc0 364fbf60 ffffffc0 [ 38.120015] [<ffffffc000083da0>] el1_irq+0x60/0xd0 [ 38.120020] [<ffffffc0000e6e48>] cpu_startup_entry+0x184/0x228 [ 38.120024] [<ffffffc000090c04>] secondary_start_kernel+0x110/0x120 [ 38.120026] CPU6: stopping [ 38.120032] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G D W 3.18.0-linaro-hikey #3 [ 38.120033] Call trace: [ 38.120038] [<ffffffc000088584>] dump_backtrace+0x0/0x124 [ 38.120043] [<ffffffc0000886b8>] show_stack+0x10/0x1c [ 38.120047] [<ffffffc000813b08>] dump_stack+0x74/0xb8 [ 38.120051] [<ffffffc000091144>] handle_IPI+0x1c0/0x288 [ 38.120055] [<ffffffc0000812cc>] gic_handle_irq+0x78/0x80 [ 38.120057] Exception stack(0xffffffc03655be20 to 0xffffffc03655bf40) [ 38.120063] be20: 00000006 00000000 36558000 ffffffc0 3655bf60 ffffffc0 000851a8 ffffffc0 [ 38.120069] be40: 00000000 00000000 00a74e38 ffffffc0 3655bf00 ffffffc0 36558000 ffffffc0 [ 38.120074] be60: 00000001 00000000 00000006 00000000 ff282e00 000d1cee dfdab8b9 00000008 [ 38.120079] be80: 36555490 ffffffc0 3655bd70 ffffffc0 00000ffc 00000000 aaaaaaab aaaaaaaa [ 38.120085] bea0: 00018380 00000000 ffffffff 00000000 00000000 00000000 00018380 00000000 [ 38.120090] bec0: 00088158 ffffffc0 b7dc5674 0000007f 00040000 00000000 00000006 00000000 [ 38.120095] bee0: 36558000 ffffffc0 00c48610 ffffffc0 00c40000 ffffffc0 00c4bb60 ffffffc0 [ 38.120100] bf00: 00828000 ffffffc0 00af3a10 ffffffc0 00c3ef61 ffffffc0 00a622d8 ffffffc0 [ 38.120105] bf20: 00000001 00000000 3655bf60 ffffffc0 000851a4 ffffffc0 3655bf60 ffffffc0 [ 38.120110] [<ffffffc000083da0>] el1_irq+0x60/0xd0 [ 38.120115] [<ffffffc0000e6e48>] cpu_startup_entry+0x184/0x228 [ 38.120118] [<ffffffc000090c04>] secondary_start_kernel+0x110/0x120 [ 38.120120] CPU5: stopping [ 38.120125] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G D W 3.18.0-linaro-hikey #3 [ 38.120126] Call trace: [ 38.120131] [<ffffffc000088584>] dump_backtrace+0x0/0x124 [ 38.120136] [<ffffffc0000886b8>] show_stack+0x10/0x1c [ 38.120140] [<ffffffc000813b08>] dump_stack+0x74/0xb8 [ 38.120144] [<ffffffc000091144>] handle_IPI+0x1c0/0x288 [ 38.120147] [<ffffffc0000812cc>] gic_handle_irq+0x78/0x80 [ 38.120150] Exception stack(0xffffffc036553e20 to 0xffffffc036553f40) [ 38.120155] 3e20: 00000005 00000000 36550000 ffffffc0 36553f60 ffffffc0 000851a8 ffffffc0 [ 38.120161] 3e40: 00000000 00000000 00a74e38 ffffffc0 36553f00 ffffffc0 36550000 ffffffc0 [ 38.120166] 3e60: 00000001 00000000 37b8b2a0 ffffffc0 37b8b2a0 ffffffc0 339e9df8 ffffffc0 [ 38.120171] 3e80: 36542850 ffffffc0 36553d70 ffffffc0 00000000 00000000 00000001 00000000 [ 38.120176] 3ea0: 00000001 00000000 00000000 00000000 00000000 00000000 00000001 00000000 [ 38.120181] 3ec0: 001154bc ffffffc0 b7ecec78 0000007f 00000000 00000000 00000005 00000000 [ 38.120187] 3ee0: 36550000 ffffffc0 00c48610 ffffffc0 00c40000 ffffffc0 00c4bb60 ffffffc0 [ 38.120192] 3f00: 00828000 ffffffc0 00af3a10 ffffffc0 00c3ef61 ffffffc0 00a622d8 ffffffc0 [ 38.120197] 3f20: 00000001 00000000 36553f60 ffffffc0 000851a4 ffffffc0 36553f60 ffffffc0 [ 38.120201] [<ffffffc000083da0>] el1_irq+0x60/0xd0 [ 38.120205] [<ffffffc0000e6e48>] cpu_startup_entry+0x184/0x228 [ 38.120210] [<ffffffc000090c04>] secondary_start_kernel+0x110/0x120 [ 38.120212] CPU3: stopping [ 38.120217] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D W 3.18.0-linaro-hikey #3 [ 38.120219] Call trace: [ 38.120224] [<ffffffc000088584>] dump_backtrace+0x0/0x124 [ 38.120228] [<ffffffc0000886b8>] show_stack+0x10/0x1c [ 38.120233] [<ffffffc000813b08>] dump_stack+0x74/0xb8 [ 38.120236] [<ffffffc000091144>] handle_IPI+0x1c0/0x288 [ 38.120240] [<ffffffc0000812cc>] gic_handle_irq+0x78/0x80 [ 38.120242] Exception stack(0xffffffc036547e20 to 0xffffffc036547f40) [ 38.120248] 7e20: 00000003 00000000 36544000 ffffffc0 36547f60 ffffffc0 000851a8 ffffffc0 [ 38.120254] 7e40: 00000000 00000000 00a74e38 ffffffc0 36547f00 ffffffc0 36544000 ffffffc0 [ 38.120259] 7e60: 00000001 00000000 365fc000 ffffffc0 ff282e00 000d1cee 00000000 00000000 [ 38.120264] 7e80: 364f2810 ffffffc0 36547d70 ffffffc0 00000025 00000000 34a79378 00000000 [ 38.120270] 7ea0: 00000016 00000000 00000000 00000000 00000000 00000000 80000000 000ee6b2 [ 38.120275] 7ec0: 00105784 ffffffc0 b7f12ef4 0000007f 00000000 00000000 00000003 00000000 [ 38.120280] 7ee0: 36544000 ffffffc0 00c48610 ffffffc0 00c40000 ffffffc0 00c4bb60 ffffffc0 [ 38.120286] 7f00: 00828000 ffffffc0 00af3a10 ffffffc0 00c3ef61 ffffffc0 00a622d8 ffffffc0 [ 38.120291] 7f20: 00000001 00000000 36547f60 ffffffc0 000851a4 ffffffc0 36547f60 ffffffc0 [ 38.120295] [<ffffffc000083da0>] el1_irq+0x60/0xd0 [ 38.120300] [<ffffffc0000e6e48>] cpu_startup_entry+0x184/0x228 [ 38.120304] [<ffffffc000090c04>] secondary_start_kernel+0x110/0x120 [ 38.120306] CPU7: stopping [ 38.120311] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G D W 3.18.0-linaro-hikey #3 [ 38.120313] Call trace: [ 38.120318] [<ffffffc000088584>] dump_backtrace+0x0/0x124 [ 38.120322] [<ffffffc0000886b8>] show_stack+0x10/0x1c [ 38.120327] [<ffffffc000813b08>] dump_stack+0x74/0xb8 [ 38.120330] [<ffffffc000091144>] handle_IPI+0x1c0/0x288 [ 38.120334] [<ffffffc0000812cc>] gic_handle_irq+0x78/0x80 [ 38.120337] Exception stack(0xffffffc03655fe20 to 0xffffffc03655ff40) [ 38.120342] fe20: 00000007 00000000 3655c000 ffffffc0 3655ff60 ffffffc0 000851a8 ffffffc0 [ 38.120348] fe40: 00000000 00000000 00a74e38 ffffffc0 3655ff00 ffffffc0 3655c000 ffffffc0 [ 38.120354] fe60: 00000001 00000000 37ba7138 ffffffc0 37ba72a0 ffffffc0 3539bc68 ffffffc0 [ 38.120359] fe80: 36554890 ffffffc0 3655fd70 ffffffc0 00000025 00000000 00000001 00000000 [ 38.120364] fea0: 00000001 00000000 00000000 00000000 00000000 00000000 fa7d7dfa 000d2a02 [ 38.120369] fec0: 001154bc ffffffc0 b7ecec78 0000007f 00000000 00000000 00000007 00000000 [ 38.120374] fee0: 3655c000 ffffffc0 00c48610 ffffffc0 00c40000 ffffffc0 00c4bb60 ffffffc0 [ 38.120380] ff00: 00828000 ffffffc0 00af3a10 ffffffc0 00c3ef61 ffffffc0 00a622d8 ffffffc0 [ 38.120385] ff20: 00000001 00000000 3655ff60 ffffffc0 000851a4 ffffffc0 3655ff60 ffffffc0 [ 38.120389] [<ffffffc000083da0>] el1_irq+0x60/0xd0 [ 38.120393] [<ffffffc0000e6e48>] cpu_startup_entry+0x184/0x228 [ 38.120397] [<ffffffc000090c04>] secondary_start_kernel+0x110/0x120 [ 38.953160] SMP: failed to stop secondary CPUs [ 38.953163] drm_kms_helper: panic occurred, switching back to text console [ 38.953182] ---[ end Kernel panic - not syncing: Fatal exception [ 39.479907] Modules linked in: mali gator btwilink tty_hci st_drv rfcomm hidp bluetooth wlcore_sdio wl18xx wlcore mac80211 cfg80211 rfkill [ 39.492466] CPU: 0 PID: 1442 Comm: surfaceflinger Tainted: G D W 3.18.0-linaro-hikey #3 [ 39.501335] Call trace: [ 39.503781] [<ffffffc000088584>] dump_backtrace+0x0/0x124 [ 39.509181] [<ffffffc0000886b8>] show_stack+0x10/0x1c [ 39.514232] [<ffffffc000813b08>] dump_stack+0x74/0xb8 [ 39.519283] [<ffffffc0000aff00>] warn_slowpath_common+0x90/0xb8 [ 39.525202] [<ffffffc0000affec>] warn_slowpath_null+0x14/0x20 [ 39.530946] [<ffffffc0006965e4>] android_fence_release+0xec/0x100 [ 39.537040] [<ffffffc000530dcc>] fence_release+0x48/0x108 [ 39.542438] [<ffffffc000696814>] sync_fence_free+0x88/0xb4 [ 39.547922] [<ffffffc000696874>] sync_fence_release+0x34/0x48 [ 39.553668] [<ffffffc0001c2818>] __fput+0x8c/0x1d0 [ 39.558458] [<ffffffc0001c29b0>] ____fput+0x8/0x14 [ 39.563247] [<ffffffc0000ca728>] task_work_run+0x94/0xec [ 39.568559] [<ffffffc000088144>] do_notify_resume+0x54/0x68 [ 39.574128] ---[ end trace c5a5447c4b70f5e4 ]--- [ 39.578746] Unable to handle kernel paging request at virtual address 00100108 [ 39.585966] pgd = ffffffc033dbb000 [ 39.589364] [00100108] *pgd=0000000000000000, *pud=0000000000000000 [ 39.595646] Internal error: Oops: 96000045 [#2] PREEMPT SMP [ 39.601215] Modules linked in: mali gator btwilink tty_hci st_drv rfcomm hidp bluetooth wlcore_sdio wl18xx wlcore mac80211 cfg80211 rfkill [ 39.613770] CPU: 0 PID: 1442 Comm: surfaceflinger Tainted: G D W 3.18.0-linaro-hikey #3 [ 39.622641] task: ffffffc035017180 ti: ffffffc033d04000 task.ti: ffffffc033d04000 [ 39.630124] PC is at android_fence_release+0xc0/0x100 [ 39.635174] LR is at android_fence_release+0xf0/0x100 [ 39.640223] pc : [<ffffffc0006965b8>] lr : [<ffffffc0006965e8>] pstate: 600001c5 [ 39.647616] sp : ffffffc033d07d70 [ 39.650927] x29: ffffffc033d07d70 x28: ffffffc033d04000 [ 39.656252] x27: ffffffc000bbd000 x26: 0000000000000039 [ 39.661577] x25: 0000000000000119 x24: ffffffc000c3f11f [ 39.666902] x23: 0000000000000140 x22: ffffffc035030d68 [ 39.672227] x21: ffffffc034f5d0c0 x20: ffffffc034f5d110 [ 39.677551] x19: ffffffc035030d00 x18: 0000007fb7f84830 [ 39.682876] x17: 0000007fb7f12f0c x16: ffffffc0001bec3c [ 39.688200] x15: 0000000000000007 x14: 0ffffffffffffffd [ 39.693525] x13: 0000000000000010 x12: ffffffc000890000 [ 39.698850] x11: 0000000000000744 x10: 0000000000000002 [ 39.704175] x9 : 0000000000000006 x8 : 0000000000000745 [ 39.709500] x7 : 6630376234633734 x6 : ffffffc000c4c27b [ 39.714823] x5 : ffffffc000c49778 x4 : 0000000000000f01 [ 39.720148] x3 : 0000000000200200 x2 : 0000000000100100 [ 39.725472] x1 : 0000000000000100 x0 : 0000000000000001 [ 39.730796] [ 39.732285] Process surfaceflinger (pid: 1442, stack limit = 0xffffffc033d04058) [ 39.739680] Stack: (0xffffffc033d07d70 to 0xffffffc033d08000) [ 39.745425] 7d60: 33d07db0 ffffffc0 00530dd0 ffffffc0 [ 39.753604] 7d80: 34d2d940 ffffffc0 35030d00 ffffffc0 34d2d940 ffffffc0 00000000 00000000 [ 39.761783] 7da0: 07fab498 ffffffc0 34d10410 ffffffc0 33d07dd0 ffffffc0 00696818 ffffffc0 [ 39.769962] 7dc0: 34d2d940 ffffffc0 00000000 00000000 33d07e00 ffffffc0 00696878 ffffffc0 [ 39.778141] 7de0: 34d2d940 ffffffc0 00000010 00000000 3637a008 ffffffc0 35277d60 ffffffc0 [ 39.786320] 7e00: 33d07e20 ffffffc0 001c281c ffffffc0 34d10400 ffffffc0 00000000 00000000 [ 39.794499] 7e20: 33d07e70 ffffffc0 001c29b4 ffffffc0 35017ba0 ffffffc0 00000000 00000000 [ 39.802677] 7e40: 00c4b000 ffffffc0 35017180 ffffffc0 00000000 00000000 00000015 00000000 [ 39.810855] 7e60: 33d07e90 ffffffc0 00000000 00000000 33d07e80 ffffffc0 000ca72c ffffffc0 [ 39.819034] 7e80: 33d07eb0 ffffffc0 00088148 ffffffc0 00000004 00000000 b701b190 0000007f [ 39.827212] 7ea0: ffffffff ffffffff b7f12f14 0000007f b6d059f0 0000007f 0008433c ffffffc0 [ 39.835390] 7ec0: 00000000 00000000 0008429c ffffffc0 00000000 00000000 b7400000 0000007f [ 39.843569] 7ee0: b7f73000 0000007f 00000008 00000000 00000000 00000000 00000006 00000000 [ 39.851748] 7f00: b7182668 0000007f 00000007 00000000 00000039 00000000 0000002c 00000000 [ 39.859926] 7f20: b7f73000 0000007f b70023e8 0000007f 00000003 00000000 b7f73000 0000007f [ 39.868105] 7f40: b7f80000 0000007f 00000007 00000000 b67fb3e0 0000007f b7f12f0c 0000007f [ 39.876283] 7f60: b7f84830 0000007f b70ce880 0000007f b701b190 0000007f 00000000 00000000 [ 39.884461] 7f80: 00000000 00000000 b6787400 0000007f b6787528 0000007f b6787550 0000007f [ 39.892640] 7fa0: 09000004 00000000 00000000 00000000 00000000 00000000 b6d059f0 0000007f [ 39.900818] 7fc0: b66b7238 0000007f b6d059f0 0000007f b7f12f14 0000007f 00000000 00000000 [ 39.908995] 7fe0: 00000018 00000000 00000039 00000000 00000000 00000000 00000000 00000000 [ 39.917170] Call trace: [ 39.919615] [<ffffffc0006965b8>] android_fence_release+0xc0/0x100 [ 39.925709] [<ffffffc000530dcc>] fence_release+0x48/0x108 [ 39.931107] [<ffffffc000696814>] sync_fence_free+0x88/0xb4 [ 39.936592] [<ffffffc000696874>] sync_fence_release+0x34/0x48 [ 39.942337] [<ffffffc0001c2818>] __fput+0x8c/0x1d0 [ 39.947128] [<ffffffc0001c29b0>] ____fput+0x8/0x14 [ 39.951918] [<ffffffc0000ca728>] task_work_run+0x94/0xec [ 39.957229] [<ffffffc000088144>] do_notify_resume+0x54/0x68 [ 39.962801] Code: 39400700 34000160 f94006c3 d2802001 (f9000443) [ 39.968894] CPU0: stopping [ 39.971600] CPU: 0 PID: 1442 Comm: surfaceflinger Tainted: G D W 3.18.0-linaro-hikey #3 [ 39.980468] Call trace: [ 39.982914] [<ffffffc000088584>] dump_backtrace+0x0/0x124 [ 39.988312] [<ffffffc0000886b8>] show_stack+0x10/0x1c [ 39.993363] [<ffffffc000813b08>] dump_stack+0x74/0xb8 [ 39.998412] [<ffffffc000091144>] handle_IPI+0x1c0/0x288 [ 40.003635] [<ffffffc0000812cc>] gic_handle_irq+0x78/0x80 [ 40.009032] Exception stack(0xffffffc033d07810 to 0xffffffc033d07930) [ 40.015473] 7800: 00c48000 ffffffc0 00000001 00000000 [ 40.023651] 7820: 33d07950 ffffffc0 00818a18 ffffffc0 00c48120 ffffffc0 00000002 00000000 [ 40.031830] 7840: 00000280 00000000 00000080 00000000 00000f01 00000000 00c49778 ffffffc0 [ 40.040007] 7860: 00c4c28b ffffffc0 38326420 30303230 00000781 00000000 00000006 00000000 [ 40.048185] 7880: 00000002 00000000 00000780 00000000 01010101 01010101 00000038 00000000 [ 40.056364] 78a0: fffffffc 0fffffff 00000007 00000000 001bec3c ffffffc0 b7f12f0c 0000007f [ 40.064542] 78c0: b7f84830 0000007f 00c48000 ffffffc0 00000001 00000000 00a5b558 ffffffc0 [ 40.072721] 78e0: 33d07c50 ffffffc0 33d04000 ffffffc0 35017180 ffffffc0 96000045 00000000 [ 40.080900] 7900: 00000039 00000000 00bbd000 ffffffc0 33d04000 ffffffc0 33d07950 ffffffc0 [ 40.089076] 7920: 00088788 ffffffc0 33d07950 ffffffc0 [ 40.094127] [<ffffffc000083da0>] el1_irq+0x60/0xd0 [ 40.098917] [<ffffffc000088784>] die+0xc0/0x1b0 [ 40.103447] [<ffffffc000811e20>] __do_kernel_fault.part.5+0x70/0x84 [ 40.109715] [<ffffffc0000951cc>] do_page_fault+0x21c/0x340 [ 40.115200] [<ffffffc0000953ac>] do_translation_fault+0xbc/0xf0 [ 40.121119] [<ffffffc000081100>] do_mem_abort+0x38/0x9c [ 40.126342] Exception stack(0xffffffc033d07bb0 to 0xffffffc033d07cd0) [ 40.132783] 7ba0: 35030d00 ffffffc0 34f5d110 ffffffc0 [ 40.140961] 7bc0: 33d07d70 ffffffc0 006965b8 ffffffc0 00add3c0 ffffffc0 35030d68 ffffffc0 [ 40.149140] 7be0: 00000140 00000000 00c3f11f ffffffc0 00000119 00000000 00000039 00000000 [ 40.157317] 7c00: 00bbd000 ffffffc0 33d04000 ffffffc0 33d07c70 ffffffc0 00000000 00000000 [ 40.165495] 7c20: 00000000 00000000 00000024 00000000 33d07ce0 ffffffc0 33d07ce0 ffffffc0 [ 40.173674] 7c40: 33d07ca0 ffffffc0 ffffffc8 00000000 00000001 00000000 00000100 00000000 [ 40.181852] 7c60: 00100100 00000000 00200200 00000000 00000f01 00000000 00c49778 ffffffc0 [ 40.190030] 7c80: 00c4c27b ffffffc0 34633734 66303762 00000745 00000000 00000006 00000000 [ 40.198208] 7ca0: 00000002 00000000 00000744 00000000 00890000 ffffffc0 00000010 00000000 [ 40.206385] 7cc0: fffffffd 0fffffff 00000007 00000000 [ 40.211435] [<ffffffc000083c24>] el1_da+0x14/0x6c [ 40.216137] [<ffffffc000530dcc>] fence_release+0x48/0x108 [ 40.221535] [<ffffffc000696814>] sync_fence_free+0x88/0xb4 [ 40.227020] [<ffffffc000696874>] sync_fence_release+0x34/0x48 [ 40.232765] [<ffffffc0001c2818>] __fput+0x8c/0x1d0 [ 40.237555] [<ffffffc0001c29b0>] ____fput+0x8/0x14 [ 40.242345] [<ffffffc0000ca728>] task_work_run+0x94/0xec [ 40.247656] [<ffffffc000088144>] do_notify_resume+0x54/0x68 [ 60.335313] ------------[ cut here ]------------ [ 60.339938] WARNING: CPU: 2 PID: 1397 at /home/liuxl/work/android/hikey-android/kernel/linaro/hisilicon/kernel/watchdog.c:302 watchdog_timer_fn+0x2e0/0x3cc() [ 60.354019] Watchdog detected hard LOCKUP on cpu 3 [ 60.358631] Modules linked in: mali gator btwilink tty_hci st_drv rfcomm hidp bluetooth wlcore_sdio wl18xx wlcore mac80211 cfg80211 rfkill [ 60.371370] CPU: 2 PID: 1397 Comm: surfaceflinger Tainted: G D W 3.18.0-linaro-hikey #3 [ 60.380239] Call trace: [ 60.382685] [<ffffffc000088584>] dump_backtrace+0x0/0x124 [ 60.388083] [<ffffffc0000886b8>] show_stack+0x10/0x1c [ 60.393134] [<ffffffc000813b08>] dump_stack+0x74/0xb8 [ 60.398185] [<ffffffc0000aff00>] warn_slowpath_common+0x90/0xb8 [ 60.404103] [<ffffffc0000aff74>] warn_slowpath_fmt+0x4c/0x58 [ 60.409761] [<ffffffc000133ce8>] watchdog_timer_fn+0x2dc/0x3cc [ 60.415595] [<ffffffc0001024b4>] __run_hrtimer+0x84/0x2f4 [ 60.420994] [<ffffffc000103098>] hrtimer_interrupt+0x108/0x2a0 [ 60.426828] [<ffffffc000670954>] arch_timer_handler_virt+0x28/0x38 [ 60.433010] [<ffffffc0000f5b98>] handle_percpu_devid_irq+0xa4/0x1a8 [ 60.439278] [<ffffffc0000f1ab8>] generic_handle_irq+0x30/0x4c [ 60.445024] [<ffffffc0000f1dbc>] __handle_domain_irq+0x84/0xf0 [ 60.450855] [<ffffffc000081288>] gic_handle_irq+0x34/0x80 [ 60.456252] Exception stack(0xffffffc030a7b750 to 0xffffffc030a7b870) [ 60.462692] b740: 00000012 00000000 00005334 00000000 [ 60.470871] b760: 30a7b890 ffffffc0 004350e0 ffffffc0 000004b0 00000000 0000006f 00000000 [ 60.479050] b780: 0524e842 00000000 30a78000 ffffffc0 00000003 00000000 37b43648 ffffffc0 [ 60.487228] b7a0: 37b43610 ffffffc0 00000000 00000000 37b43610 ffffffc0 00000001 00000000 [ 60.495406] b7c0: 00c4bd30 ffffffc0 00bc8000 ffffffc0 01010101 01010101 00000038 00000000 [ 60.503585] b7e0: fffffffe 0fffffff 00000000 00000000 001bec3c ffffffc0 b7f12f0c 0000007f [ 60.511764] b800: b7f84830 0000007f 00000012 00000000 00005334 00000000 00005398 00000000 [ 60.519943] b820: 00c49000 ffffffc0 00000001 00000000 359fe2c0 ffffffc0 96000045 00000000 [ 60.528121] b840: 00000039 00000000 00bbd000 ffffffc0 30a78000 ffffffc0 30a7b890 ffffffc0 [ 60.536298] b860: 0043511c ffffffc0 30a7b890 ffffffc0 [ 60.541348] [<ffffffc000083da0>] el1_irq+0x60/0xd0 [ 60.546137] [<ffffffc000812044>] panic+0x210/0x220 [ 60.550928] [<ffffffc000088864>] die+0x1a0/0x1b0 [ 60.555545] [<ffffffc000811e20>] __do_kernel_fault.part.5+0x70/0x84 [ 60.561811] [<ffffffc0000951cc>] do_page_fault+0x21c/0x340 [ 60.567297] [<ffffffc0000953ac>] do_translation_fault+0xbc/0xf0 [ 60.573216] [<ffffffc000081100>] do_mem_abort+0x38/0x9c [ 60.578439] Exception stack(0xffffffc030a7bbb0 to 0xffffffc030a7bcd0) [ 60.584879] bba0: 351c77c0 ffffffc0 34f58610 ffffffc0 [ 60.593057] bbc0: 30a7bd70 ffffffc0 006965b8 ffffffc0 00add3c0 ffffffc0 351c7828 ffffffc0 [ 60.601237] bbe0: 00000140 00000000 00c3f11f ffffffc0 00000119 00000000 00000039 00000000 [ 60.609415] bc00: 00bbd000 ffffffc0 30a78000 ffffffc0 30a7bc70 ffffffc0 00000000 00000000 [ 60.617593] bc20: 00000002 00000000 00000024 00000000 30a7bce0 ffffffc0 30a7bce0 ffffffc0 [ 60.625771] bc40: 30a7bca0 ffffffc0 ffffffc8 00000000 00000001 00000000 00000100 00000000 [ 60.633950] bc60: 00100100 00000000 00200200 00000000 00000002 00000000 37b3fe00 ffffffc0 [ 60.642127] bc80: 37b3fda8 ffffffc0 00000000 00000000 37b3fda8 ffffffc0 00000001 00000000 [ 60.650305] bca0: 00c4bd30 ffffffc0 00bc8000 ffffffc0 00890000 ffffffc0 00000010 00000000 [ 60.658482] bcc0: fffffffd 0fffffff 00000000 00000000 [ 60.663532] [<ffffffc000083c24>] el1_da+0x14/0x6c [ 60.668235] [<ffffffc000530dcc>] fence_release+0x48/0x108 [ 60.673633] [<ffffffc000696814>] sync_fence_free+0x88/0xb4 [ 60.679117] [<ffffffc000696874>] sync_fence_release+0x34/0x48 [ 60.684863] [<ffffffc0001c2818>] __fput+0x8c/0x1d0 [ 60.689653] [<ffffffc0001c29b0>] ____fput+0x8/0x14 [ 60.694442] [<ffffffc0000ca728>] task_work_run+0x94/0xec [ 60.699753] [<ffffffc000088144>] do_notify_resume+0x54/0x68 [ 60.705323] ---[ end trace c5a5447c4b70f5e5 ]--- --------------------------------------------------------kernel log end------------------------------------------------- --------------------------------------------------------logcat log begin------------------------------------------------- --------- beginning of main E/sdcard ( 0): missing packages.list; retrying I/ ( 0): debuggerd: Apr 27 2015 15:10:21 I/installd( 0): installd firing up I/ ( 0): debuggerd: Apr 27 2015 15:10:21 I/lowmemorykiller( 1394): Using in-kernel low memory killer interface E/sdcard ( 1409): missing packages.list; retrying I/SurfaceFlinger( 1397): SurfaceFlinger is starting I/SurfaceFlinger( 1397): SurfaceFlinger's main thread ready to run. Initializing graphics H/W... D/libEGL ( 1397): loaded /system/lib64/egl/libGLES_mali.so I/MaliBase( 1397): Mali libraries: I/MaliBase( 1397): Compiled: Apr 27 2015, time: 15:12:48. I/MaliBase( 1397): Driver revision: edcbbaa I/Netd ( 1399): Netd 1.0 starting --------- beginning of system I/Vold ( 1396): Vold 2.1 (the revenge) firing up E/Netd ( 1399): Failed to open /proc/sys/net/ipv6/conf/default/accept_ra_rt_table: No such file or directory E/Netd ( 1399): Failed to open /proc/sys/net/ipv6/conf/lo/accept_ra_rt_table: No such file or directory E/Netd ( 1399): Failed to open /proc/sys/net/ipv6/conf/wlan0/accept_ra_rt_table: No such file or directory E/Netd ( 1399): Failed to open /proc/sys/net/ipv6/conf/default/use_optimistic: No such file or directory E/Netd ( 1399): Failed to open /proc/sys/net/ipv6/conf/lo/use_optimistic: No such file or directory E/Netd ( 1399): Failed to open /proc/sys/net/ipv6/conf/wlan0/use_optimistic: No such file or directory W/[Gralloc-Warning]( 1397): int init_frame_buffer_locked(private_module_t*):305 fbdev pixclock is zero for fd: 11 I/[Gralloc]( 1397): using (fd=11) I/[Gralloc]( 1397): id = I/[Gralloc]( 1397): xres = 1280 px I/[Gralloc]( 1397): yres = 720 px I/[Gralloc]( 1397): xres_virtual = 1280 px I/[Gralloc]( 1397): yres_virtual = 1440 px I/[Gralloc]( 1397): bpp = 32 I/[Gralloc]( 1397): r = 16:8 I/[Gralloc]( 1397): g = 8:8 I/[Gralloc]( 1397): b = 0:8 I/[Gralloc]( 1397): width = 203 mm (160.157639 dpi) I/[Gralloc]( 1397): height = 114 mm (160.421051 dpi) I/[Gralloc]( 1397): refresh rate = 60.00 Hz E/SurfaceFlinger( 1397): hwcomposer module not found I/SurfaceFlinger( 1397): EGL information: I/SurfaceFlinger( 1397): vendor : Android I/SurfaceFlinger( 1397): version : 1.4 Android META-EGL I/SurfaceFlinger( 1397): extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_KHR_create_context EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer EGL_ANDROID_recordable I/SurfaceFlinger( 1397): Client API: OpenGL_ES I/SurfaceFlinger( 1397): EGLSurface: 8-8-8-8, config=0x60000016 I/keystore( 1405): SELinux: Keystore SELinux is disabled. I/SurfaceFlinger( 1397): OpenGL ES informations: I/SurfaceFlinger( 1397): vendor : ARM I/SurfaceFlinger( 1397): renderer : Mali-450 MP I/SurfaceFlinger( 1397): version : OpenGL ES 2.0 I/SurfaceFlinger( 1397): extensions: GL_EXT_debug_marker GL_OES_texture_npot GL_OES_vertex_array_object GL_OES_compressed_ETC1_RGB8_texture GL_EXT_compressed_ETC1_RGB8_sub_texture GL_OES_standard_derivatives GL_OES_EGL_image GL_OES_depth24 GL_ARM_rgba8 GL_ARM_mali_shader_binary GL_OES_depth_texture GL_OES_packed_depth_stencil GL_EXT_texture_format_BGRA8888 GL_OES_vertex_half_float GL_EXT_blend_minmax GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_rgb8_rgba8 GL_EXT_multisampled_render_to_texture GL_EXT_discard_framebuffer GL_OES_get_program_binary GL_ARM_mali_program_binary GL_EXT_shader_texture_lod GL_EXT_robustness GL_OES_depth_texture_cube_map GL_KHR_debug GL_ARM_shader_framebuffer_fetch GL_ARM_shader_framebuffer_fetch_depth_stencil GL_OES_mapbuffer I/SurfaceFlinger( 1397): GL_MAX_TEXTURE_SIZE = 4096 I/SurfaceFlinger( 1397): GL_MAX_VIEWPORT_DIMS = 4096 E/cutils-trace( 1397): Error opening trace file: Permission denied (13) D/[EGL] ( 1397): mali_mem_type* native_buffer_wrap(mali_base_ctx_handle, android_native_buffer_t*, uintptr_t, void*, u32, u32):431: create buffer from FB physical address (0x0x3f100000 + 0 mem handle: 0x7fb7053560) D/SurfaceFlinger( 1397): Set power mode=2, type=0 flinger=0x7fb7062000 D/SurfaceFlinger( 1397): shader cache generated - 24 shaders in 265.415833 ms I/iptables( 1399): iptables v1.4.20: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) I/iptables( 1399): Perhaps iptables or your kernel needs to be upgraded. I/iptables( 1399): iptables terminated by exit(3) E/Netd ( 1399): exec() res=0, status=768 for /system/bin/iptables -t nat -N oem_nat_pre I/iptables( 1399): iptables v1.4.20: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) I/iptables( 1399): Perhaps iptables or your kernel needs to be upgraded. I/iptables( 1399): iptables terminated by exit(3) E/Netd ( 1399): exec() res=0, status=768 for /system/bin/iptables -t nat -A PREROUTING -j oem_nat_pre I/iptables( 1399): iptables v1.4.20: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) I/iptables( 1399): Perhaps iptables or your kernel needs to be upgraded. I/iptables( 1399): iptables terminated by exit(3) E/Netd ( 1399): exec() res=0, status=768 for /system/bin/iptables -t nat -N natctrl_nat_POSTROUTING I/iptables( 1399): iptables v1.4.20: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) I/iptables( 1399): Perhaps iptables or your kernel needs to be upgraded. I/iptables( 1399): iptables terminated by exit(3) E/Netd ( 1399): exec() res=0, status=768 for /system/bin/iptables -t nat -A POSTROUTING -j natctrl_nat_POSTROUTING V/NatController( 1399): runCmd(/system/bin/iptables -F natctrl_FORWARD) res=0 V/NatController( 1399): runCmd(/system/bin/iptables -A natctrl_FORWARD -j DROP) res=0 V/NatController( 1399): runCmd(/system/bin/iptables -t nat -F natctrl_nat_POSTROUTING) res=3 E/sdcard ( 1409): missing packages.list; retrying E/Netd ( 1399): Unable to create netlink socket: Protocol not supported E/Netd ( 1399): Unable to open quota2 logging socket D/MDnsDS ( 1399): MDnsSdListener::Hander starting up D/MDnsDS ( 1399): MDnsSdListener starting to monitor D/MDnsDS ( 1399): Going to poll with pollCount 1 I/mediaserver( 1403): ServiceManager: 0xf60700c0 I/AudioFlinger( 1403): Using default 3000 mSec as standby time. I/ServiceManager( 1403): Waiting for service batterystats... I/ServiceManager( 1403): Waiting for service batterystats... E/sdcard ( 1409): missing packages.list; retrying I/ServiceManager( 1403): Waiting for service batterystats... I/ServiceManager( 1403): Waiting for service batterystats... D/libEGL ( 1573): loaded /system/lib64/egl/libGLES_mali.so I/MaliBase( 1573): Mali libraries: I/MaliBase( 1573): Compiled: Apr 27 2015, time: 15:12:48. I/MaliBase( 1573): Driver revision: edcbbaa D/[EGL] ( 1397): mali_mem_type* native_buffer_wrap(mali_base_ctx_handle, android_native_buffer_t*, uintptr_t, void*, u32, u32):431: create buffer from FB physical address (0x0x3f100000 + 3686400 mem handle: 0x7fb71dbf00) E/cutils-trace( 1573): Error opening trace file: Permission denied (13) --------------------------------------------------------logcat log end------------------------------------------------- Best regards, -Xinliang Liu

8 years, 11 months