Following the wiki[1], I tried to flash a UEFI setup, but it's hanging as soon as I try to enter the shell[2]. Any ideas what's going on?
Also, it seems that wiki may need a refresh. The link to the nvme.img is broken, but I found one from the "latest"dir. Also, according to Tyler/Fathi, it seems should be using the ptable.img from http://builds.96boards.org/snapshots/hikey/binaries/20150505?
Anyways, any pointers or wiki updates that would help me actually use EFI would be most helpful.
Kevin
[1] https://github.com/96boards/documentation/wiki/UEFI [2] debug EMMC boot: print init OK debug EMMC boot: send RST_N . debug EMMC boot: start eMMC boot...... load fastboot1!
Switch to aarch64 mode. CPU0 executes at 0xf9801000! NOTICE: Booting Trusted Firmware NOTICE: BL1: v1.1(release):b6cfb3ed2eb4 NOTICE: BL1: Built : 16:02:44, May 8 2015 NOTICE: succeed to init lpddr3 rank0 dram phy INFO: lpddr3_freq_init, set ddrc 533mhz INFO: init ddr3 rank0 INFO: ddr3 rank1 init pass INFO: lpddr3_freq_init, set ddrc 800mhz INFO: init ddr3 rank0 INFO: ddr3 rank1 init pass INFO: Elpida DDR NOTICE: BL1: Booting BL2 NOTICE: acpu_dvfs_set_freq: set acpu freq success!NOTICE: BL2: v1.1(release):b6cfb3ed2eb4 NOTICE: BL2: Built : 16:02:46, May 8 2015 ERROR: Failed to load BL3-0 (-1) ERROR: Please burn mcu image: ERROR: sudo fastboot flash mcuimage mcuimage.bin NOTICE: BL1: Booting BL3-1 NOTICE: BL3-1: v1.1(release):b6cfb3ed2eb4 NOTICE: BL3-1: Built : 16:02:48, May 8 2015 UEFI firmware (version PreAlpha built at 16:02:31 on May 8 2015) 3h3h3h3hThe default boot selection will start in 10 seconds.. [1] Linux from eMMC [2] Shell [3] Boot Manager Start: 2