hi
this iic driver enable one port which has been used by adv7533 module. if you enable other iic port you should require to some code in dts.
Low Speed expansion connector.
thank you xinwei
On 2015/9/18 15:17, Guodong Xu wrote:
Date: Fri, 18 Sep 2015 14:34:03 +0800 From: kong.kongxinwei@hisilicon.com To: dev@lists.96boards.org Subject: Re: [Dev] I2C on HiKey
On 2015/9/16 20:57, Grant Likely wrote:
Has anyone played with i2c on the HiKey board? I only see one i2c bus registered in sysfs. I want to use both i2c buses on the LS connector.
what is LS connector.
The low-speed connector, labelled as "J2" on HiKey board.
Dev mailing list Dev@lists.96boards.org https://lists.96boards.org/mailman/listinfo/dev
Dev mailing list Dev@lists.96boards.org https://lists.96boards.org/mailman/listinfo/dev