Hi folks,
Has anyone used the HiKey board (or hi6220 reference board) with a JTAG debugger like Lauterbach Trace32?
If so I would be interested in seeing a copy of any configuration / scripts you used to get it going.
regards,
Peter.
Hi Peter,
We don't have any JTAG debugger. Only UART console and LEDs are our friends.
Regards Haojian
On 12 May 2015 at 22:54, Peter Griffin peter.griffin@linaro.org wrote:
Hi folks,
Has anyone used the HiKey board (or hi6220 reference board) with a JTAG debugger like Lauterbach Trace32?
If so I would be interested in seeing a copy of any configuration / scripts you used to get it going.
regards,
Peter.
Dev mailing list Dev@lists.96boards.org https://lists.96boards.org/mailman/listinfo/dev
Hi Haojian,
We don't have any JTAG debugger. Only UART console and LEDs are our friends.
OK thanks for the info. It looks like I maybe going where no JTAG has gone before ;-)
All,
I'm looking at buying some FTSH-105-01-L-DV connectors.
Farnell sale them here http://uk.farnell.com/samtec/ftsh-105-01-l-dv/header-1-27mm-smd-10way/dp/166... and they are in stock. However minimum UK order via debit / credit card with Farnell is £20, so I will end up with ~17 connectors. So if anyone wants one and doesn't mind waiting I will have some spare to give away at connect.
You can buy them on ebay for about £4.50 each, but there are 4 Linaro people in Bristol, which takes us close to £20, plus my soldering isn't very good so I might need more than one.
In case anyone else is wishing to go down the same route, I've also bought (thanks to Lees research): -
http://www.adafruit.com/products/1675?utm_source=contextly&utm_medium=mo...
and
http://www.adafruit.com/products/2094?utm_source=contextly&utm_medium=mo...
Which should allow me to interface from a <insert-ftdi-based-jtag-device-here> to HiKey.
regards,
Peter.
-
Haojian Zhuang -
Peter Griffin