Hi Folks
I've been looking a simple ways to hack together a simple through hole mezzanine board.
One way is to get hold of a small protoboard[1] and hook it up to a 2mm to 2.54mm converter board such as this one by a small outfit called bitwizard[2].
I've been in touch with bitwizard and they are happy to make a run of boards with a male connector on the underside of the adapter board so we can hook it up directly to the 96boards LS connector. After that I just plan to drop the protoboard on the 2.54mm pins, solder it down and start creating...
However the postage costs from Holland might be a bit steep for just me so I wondered if anyone else was interested in a group buy. If you're in the UK I can post out from here... if you're not in the UK and want in on the action I guess I could hand over some boards at the next 'connect. Guesstimated numbers are £3 per board plus £1 for P&P.
Daniel.
[2] http://www.bitwizard.nl/cat/product_info.php?cPath=35&products_id=139
Hi Daniel,
I'd be interested in getting one please.
regards,
Peter.
On 12 March 2015 at 13:56, Daniel Thompson daniel.thompson@linaro.org wrote:
Hi Folks
I've been looking a simple ways to hack together a simple through hole mezzanine board.
One way is to get hold of a small protoboard[1] and hook it up to a 2mm to 2.54mm converter board such as this one by a small outfit called bitwizard[2].
I've been in touch with bitwizard and they are happy to make a run of boards with a male connector on the underside of the adapter board so we can hook it up directly to the 96boards LS connector. After that I just plan to drop the protoboard on the 2.54mm pins, solder it down and start creating...
However the postage costs from Holland might be a bit steep for just me so I wondered if anyone else was interested in a group buy. If you're in the UK I can post out from here... if you're not in the UK and want in on the action I guess I could hand over some boards at the next 'connect. Guesstimated numbers are £3 per board plus £1 for P&P.
Daniel.
[2] http://www.bitwizard.nl/cat/product_info.php?cPath=35&products_id=139
Dev mailing list Dev@lists.96boards.org https://lists.96boards.org/mailman/listinfo/dev
On 12/03/15 13:56, Daniel Thompson wrote:
Hi Folks
I've been looking a simple ways to hack together a simple through hole mezzanine board.
One way is to get hold of a small protoboard[1] and hook it up to a 2mm to 2.54mm converter board such as this one by a small outfit called bitwizard[2].
I've been in touch with bitwizard and they are happy to make a run of boards with a male connector on the underside of the adapter board so we can hook it up directly to the 96boards LS connector. After that I just plan to drop the protoboard on the 2.54mm pins, solder it down and start creating...
However the postage costs from Holland might be a bit steep for just me so I wondered if anyone else was interested in a group buy. If you're in the UK I can post out from here... if you're not in the UK and want in on the action I guess I could hand over some boards at the next 'connect. Guesstimated numbers are £3 per board plus £1 for P&P.
If there is anyone else interested in these please me let me know by Wednesday.
Thanks
Daniel.
Daniel.
[2] http://www.bitwizard.nl/cat/product_info.php?cPath=35&products_id=139
Dev mailing list Dev@lists.96boards.org https://lists.96boards.org/mailman/listinfo/dev
-
Daniel Thompson -
Peter Griffin