Hi,
Seems like LeMaker have designed their own version of a HiKey board:
http://www.lemaker.org/article-57-1.html
I'd hope this brings a better supply situation, as so far there seems to
have been rather a lack of such. One reason why I went with the
immediately available Dragonboard at that time.
Also I've spotted a borad named "LeMaker Bass" on their site, that
claims to have an Action Semi S900 SoC and is labeled 4/96:
http://www.lemaker.org/article-47-1.html
The description mentions "96boards compatible". I guess that means
compliance, for some definition of such.
Interesting times are ahead of us.
--
Thomas
Hi,
I am trying to flash my early access hikey board without success. I am
trying to boot the board in "install bootloader" mode with pin 1-2 and 3-4
installed. The USB device is getting registered but gets disconnected. I
can see others have faced similar issue but i can't find a fix for this
problem
dmesg log -
[ 6888.363849] usb 1-1.1: Product:
\xffffffe3\xffffff84\xffffffb0\xffffff84\xffffffb0\xffffffe3\xffffff8c\xffffffb2\xffffff8c\xffffffb2\xffffffe3\xffffff94\xffffffb4\xffffff94\xffffffb4\xffffffe3\xffffff9c\xffffffb6\xffffff9c\xffffffb6\xffffffe3\xffffffa4\xffffffb8\xffffffa4\xffffffb8
[ 6888.363853] usb 1-1.1: Manufacturer:
\xffffffe4\xffffff95\xffffff87\xffffff95\xffffff87\xffffffe4\xffffff95\xffffff8e\xffffff95\xffffff8e\xffffffe4\xffffffa5\xffffff8e\xffffffa5\xffffff8e
[ 6888.364651] option 1-1.1:1.0: GSM modem (1-port) converter detected
[ 6888.364923] usb 1-1.1: GSM modem (1-port) converter now attached to
ttyUSB0
[ 6888.837543] usb 1-1.1: USB disconnect, device number 11
[ 6888.837936] option1 ttyUSB0: GSM modem (1-port) converter now
disconnected from ttyUSB0
[ 6888.837996] option 1-1.1:1.0: device disconnected
--
Regards,
Amit Khare
Hi,
Just what it says in the Subject:
When is the dragonboard 410c going to be 96boards CE compliant?
Just /one/ example:
Schematics are still not available, although mandated by compliance spec.
Has anyone seen the compliance report of the board and could shed some
light on all those issues? I'd like to see it, if possible.
Thanks!
Thomas
Hi,
When I include mcuimage.bin from Apr 9 as bl30 in fip, my system gets caught in an endless reboot sequence.
I use latest HiKey ATF and it works fine without bl30.
With ATF from June it works fine to include bl30.
Is this expected behaviour ?
Thanks,
Stefan
