On 4 October 2015 at 00:07, Fathi Boudra fathi.boudra@linaro.org wrote:
On 3 October 2015 at 16:06, Lee Jones lee.jones@linaro.org wrote:
After following the instructions in the Quick Start Guide for booting from SD card I receive:
[tux.img][tux.img][tux.img][tux.img][tux.img][tux.img][tux.img][tux.img] [STAMP] kvm [1]: HYP mode not available [STAMP] of_dma_request_slave_channel: dma-names property of node '/smb/uart@f8015000' missing or empty [STAMP] hisi_thermal f7030700.tsensor: THERMAL ALARM: T > 80
<DEAD>
Has anyone else seen this? Is it a known issue, or all-my-fault(tm)?
there's a known issue in the latest builds however build #323 should work. https://bugs.96boards.org/show_bug.cgi?id=100
Hi, Lee, Fathi
I updated this bug, it's not reproduced with the following images:
UEFI #72, boot img: Debian 354, https://builds.96boards.org/snapshots/hikey/linaro/debian/354/boot-fat.uefi....
Debian developer image for SD card: hikey-jessie_developer_20150929-354.img,
booting from SD card can succeed.
NB: This is 'hikey-jessie_alip_20150701-323.img'. Booting
'hikey-jessie_developer_20150701-323.emmc.img' from eMMC works fine.
Debian #323 looks quite old to me. I will not recommend you to waste time on it.
BTW, one side-note to Fathi,
With Debian #354, boot image is always in eMMC. Can we choose to load grub from SD card then load Image from SD's boot partition?
Ref: when booting from SD card: root@linaro-developer:~# mount
/dev/mmcblk1p2 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered) /dev/mmcblk0p6 on /boot type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro) ...
-Guodong
Kind regards, Lee
Cheers, Fathi _______________________________________________ Dev mailing list Dev@lists.96boards.org https://lists.96boards.org/mailman/listinfo/dev