+Oldpan from LeMaker
Milosz, one more qestion, do you see any /dev/ttyUSB* on PC side when you try to flash that board?
On 13 January 2016 at 09:30, Guodong Xu firstname.lastname@example.org wrote:
On 13 January 2016 at 02:39, Milosz Wasilewski < email@example.com> wrote:
I'm trying to flash HiKey board using standard procedure but I'm not getting any signs of life on the host laptop after connecting the USB cable. I checked both recovery mode and fastboot.efi. I tested with 2 cables and different USB sockets on my laptop and USB hub. Has anyone seen the failure like this? The board is flashed with alip image and can boot just fine.
So, your board can boot into debian alip image well, but it fails to enter either recovery mode (jumper 3-4) or fastboot.efi (jumper 5-6) mode. I didn't hear this before.
When it boots into debian alip, can the OTG port work well?
Cheers, milosz _______________________________________________ Dev mailing list Dev@lists.96boards.org https://lists.96boards.org/mailman/listinfo/dev