On Wed, Mar 18, 2015 at 09:04:15PM +0000, George Grey wrote:
Assuming you are running the “release” build and bootloader - no - the thermal control is overly aggressive until we tune it so you should not see any problems (however the cores may only run at 200MHz!). George
Yes.
If use hisilicon bootloader + v3.18 kernel, the thermal driver with cpu cooling device has been enabled. So if the temperature > 70'c, the cpu frequency will be limited; and if temp > 90'c, the system will be reset, which this condition is hard to meet.
So suppose most case is to downgrade cpu frequency. If debug for performance issue, suggest to check cpufreq info.
On Mar 18, 2015, at 6:22 PM, Jorge Ramirez-Ortiz jorge.ramirez-ortiz@linaro.org wrote:
Should we expect any thermal issues if we leave the Hikeys always on?
Dev mailing list Dev@lists.96boards.org https://lists.96boards.org/mailman/listinfo/dev
Dev mailing list Dev@lists.96boards.org https://lists.96boards.org/mailman/listinfo/dev