What kind of SD media do you have?
On Oct 4, 2015, at 10:17 AM, Lee Jones lee.jones@linaro.org wrote:
Hooked up a serial cable and raised the loglevel.
For some reason the kernel isn't finding the SD card:
<snip>
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/mmcblk1p2 does not exist. Dropping to a shell!
(initramfs) cat /proc/cmdline iommu_ddr_size=0x40000000 console=tty0 console=ttyAMA0,115200n8 root=/dev/mmcblk1p2 rootwait rw mem=908M boardid=0x48696220,0x00000011,0x0000002b thermal_trim=0x9a492400 pd_charge=0 boottype=defaultnormal enter_recovery=0 androidboot.swtype=normal fastboot_version= himntn=111111111111111111
(initramfs) ls /dev/mmc* brw------- 1 0 0 179, 0 /dev/mmcblk0 brw------- 1 0 0 179, 64 /dev/mmcblk0boot0 brw------- 1 0 0 179,128 /dev/mmcblk0boot1 brw------- 1 0 0 179, 1 /dev/mmcblk0p1 brw------- 1 0 0 179, 2 /dev/mmcblk0p2 brw------- 1 0 0 179, 3 /dev/mmcblk0p3 brw------- 1 0 0 179, 4 /dev/mmcblk0p4 brw------- 1 0 0 179, 5 /dev/mmcblk0p5 brw------- 1 0 0 179, 6 /dev/mmcblk0p6 brw------- 1 0 0 179, 7 /dev/mmcblk0p7 brw------- 1 0 0 179, 8 /dev/mmcblk0p8 brw------- 1 0 0 179, 9 /dev/mmcblk0p9
On 3 October 2015 at 17:07, Fathi Boudra <fathi.boudra@linaro.org mailto:fathi.boudra@linaro.org> wrote:
On 3 October 2015 at 16:06, Lee Jones lee.jones@linaro.org wrote:
After following the instructions in the Quick Start Guide for booting from SD card I receive:
[tux.img][tux.img][tux.img][tux.img][tux.img][tux.img][tux.img][tux.img] [STAMP] kvm [1]: HYP mode not available [STAMP] of_dma_request_slave_channel: dma-names property of node '/smb/uart@f8015000' missing or empty [STAMP] hisi_thermal f7030700.tsensor: THERMAL ALARM: T > 80
<DEAD>
Has anyone else seen this? Is it a known issue, or all-my-fault(tm)?
there's a known issue in the latest builds however build #323 should work. https://bugs.96boards.org/show_bug.cgi?id=100
NB: This is 'hikey-jessie_alip_20150701-323.img'. Booting 'hikey-jessie_developer_20150701-323.emmc.img' from eMMC works fine.
Kind regards, Lee
Cheers, Fathi
-- Lee Jones Linaro ST Landing Team Lead Linaro.org http://linaro.org/ │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog _______________________________________________ Dev mailing list Dev@lists.96boards.org mailto:Dev@lists.96boards.org https://lists.96boards.org/mailman/listinfo/dev https://lists.96boards.org/mailman/listinfo/dev