On 28 Sep 2015 19:45, "Zoltan Kuscsik" zoltan.kuscsik@linaro.org wrote:
How about pressing the S4 button on the board? It works for me for
jumping into fastboot.
Z
On 28 September 2015 at 20:39, Daniel Thompson daniel.thompson@linaro.org
wrote:
Hi Folks
I'm just trying to kick the tyres of my sensors board. I'm using a
dragonboard because that's the board I have "spare" to play with.
I've tried to play "dumb" and follow only documented instructions... as
a result I have a dragonboard flashed with the latest builds of the boot-and-rootfs from the releases directory.
This build does not play nicely with the sensors board because
/dev/ttyMSM1 does not exist. As a result I cannot use the UART0 pins on the LS connector to try and talk to the AVR (i.e. this is *not* the known issue that the AVR may have no bootloader).
I haven't yet made much of a attempt to debug this (and won't until
tomorrow at best). However... has anyone already overcome this problem?
Daniel
PS Does anyone have a canned command to deliberately corrupt the
boot-and-rootfs so I can get the board to jump into fastboot (so I can try a snapshot) without having to take the sensors board of the top so I can press Vol- ;-) ?
You should be able to use the Sonic Screwdriver 96boardsctl utility to reset the board. It twiddles the reset line on the LS connector, which is the same signal as Vol- (at least, so I'm told)
g.
Dev mailing list Dev@lists.96boards.org https://lists.96boards.org/mailman/listinfo/dev
-- Zoltan Kuscsik
Senior Software Developer, Linaro Digital Home Group email: zoltan.kuscsik@linaro.org IRC: zoli_ on irc.linaro.org
Dev mailing list Dev@lists.96boards.org https://lists.96boards.org/mailman/listinfo/dev