29 Sep
2015
29 Sep
'15
10:15 a.m.
On 28/09/15 19:44, Zoltan Kuscsik wrote:
How about pressing the S4 button on the board? It works for me for jumping into fastboot.
That works for me too. Unfortunately once the sensor board is installed the button is no longer easily accessible...
Daniel.
Z
On 28 September 2015 at 20:39, Daniel Thompson <daniel.thompson@linaro.org mailto:daniel.thompson@linaro.org> wrote:
Hi Folks I'm just trying to kick the tyres of my sensors board. I'm using a dragonboard because that's the board I have "spare" to play with. I've tried to play "dumb" and follow only documented instructions... as a result I have a dragonboard flashed with the latest builds of the boot-and-rootfs from the releases directory. This build does not play nicely with the sensors board because /dev/ttyMSM1 does not exist. As a result I cannot use the UART0 pins on the LS connector to try and talk to the AVR (i.e. this is *not* the known issue that the AVR may have no bootloader). I haven't yet made much of a attempt to debug this (and won't until tomorrow at best). However... has anyone already overcome this problem? Daniel PS Does anyone have a canned command to deliberately corrupt the boot-and-rootfs so I can get the board to jump into fastboot (so I can try a snapshot) without having to take the sensors board of the top so I can press Vol- ;-) ? _______________________________________________ Dev mailing list Dev@lists.96boards.org <mailto:Dev@lists.96boards.org> https://lists.96boards.org/mailman/listinfo/dev-- Zoltan Kuscsik
Senior Software Developer, Linaro Digital Home Group email: zoltan.kuscsik@linaro.org mailto:zoltan.kuscsik@linaro.org IRC: zoli_ on irc.linaro.org http://irc.linaro.org/